Part No: RXSOL-16-3763-025
RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces. During the distillation process, the formation of scale on heat transfer surfaces can sig
RXSOL Altreat 400 is a new generation Antiscalant and antifouling agent for Distillation Plant, RXSOL Altreat 400 helps to maintain Cost-effective recovery of fresh water from seawater and it is critical to a wide range of industries such as the power, chemical, marine, oil and gas industries.
Instructions for use
- Normal dosing rate 2–10 ppm (max. 10 ppm), depending
- on the properties of the water to be treated. Ensure adequate mixing at chemical tank before dosing into the system.
-
Recommended operating temperatures: 50°–80°C.
The typical dosage to feedwater ranges from a minimum of two parts per million (ppm) to a maximum of 10 ppm, depending on the quality of the seawater.
- Highly concentrated liquid delivers substantial savings since up to 40% less solution than other polymaleates is required to achieve the same effect.
- Highly effective, but gentle, solution does not harm the environment or heat exchanger tubes, plates, gaskets or glue.
- Highly versatile scale inhibitor delivers effective performance while operating in temperatures up to 80ºC.Helps maintain heat transfer rates, thus improving process performance, reducing energy costs and prolonging heat exchanger lifetime.Increases the efficiency and performance of the equipment,reducing total operation and maintenance costs.
- Recommended operating temperatures: 50°–80°C.
specification:-
| Appearance: | Colourless |
| Specific gravity (water=1) | > 1 |
|
Viscosity: |
600 mm2/s at 23°C |
| Flash point: | >100°C |
| pH: | 6-8 at 20°C |
| Miscibility with water | In all proportions |
RXSOL Altreat 400 is a new generation Anti-fouling agent, Antiscalant for desalination plants, manufacturer and supplier in Dubai, Sharjah, Abudhabi, Ajman, Fujairah, Muscat, Oman, Navi Mumbai, Surat, Gandhidham, Visakhapatnam, Chennai Ennore, Kolkata Haldia, Sudan, Yemen, Mumbai, Kolkata, Chennai, Vizag Visakhapatnam, Surat, KANDLA Gujrat, Ruwi Barka Sohar, Sudan Yemen
Scale inhibitor for fresh water generators and desalination plants.
Manufacturer and supplier of Anti-fouling agent, Antiscalant in Desalination plants.
During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. Scale formation depends on temperature, concentration and pH, but generally takes the form of:
- Calcium carbonate,
- Magnesium hydroxide, and,
- Calcium sulphate.
Conventional scale inhibition methods, such as the use of sulphuric acid and polyphosphates, have given rise to a new generation of antiscalants based on polycarboxylic acids.
Safety Data (MSDS)
| Product Name | RXSOL-16-3763-210 |
| Product Type | RXSOL Altreat 400 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Points: Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah UAE, Muscat Oman, Kenya, Canada
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Weight-% |
CAS Number |
EC Number |
Classification |
Risk Phrases |
|
Polymaleic Acid |
30-45 |
127121-37-3 |
- |
Not applicable |
Not applicable |
| Ingrediants that do not contribute to the classification of the product | 55-70 | --- | --- |
*See Section 16
|
Odour |
Product specific |
|
Appearance |
Light Yellowish to Brown liquid |
|
Contact with eyes |
Wash affected eyes for at least 10 minutes with tepid, Hold eyelids apart |
|
Contact with skin |
Wash thoroughly with soap and water |
|
Inhalation |
If difficulties occur after vapor/aerosol has been inhaled, remove to fresh air and seek medical attention. |
|
Ingestion |
Rinse mouth and then drink plenty of water. |
|
Contact with skin |
Wash thoroughly with soap and water. |
|
Contact with eyes |
Wash affected eyes for at least 10 minutes with tepid. Hold eyelids apart. |
|
Ingestion |
Rinse mouth and then drink plenty of water. Do not induce vomiting. |
|
Inhalation |
If difficulties occur after vapor/aerosol has been inhaled, remove to fresh air and seek medical attention. |
|
General |
Remove contaminated clothing. |
Note to physician:-Treat according to symptoms (decontamination, vital functions), no known specific antidote.
- Extinguishing media:-Water spray, carbon dioxide (CO2), foam or dry extinguishing media
- Specific hazards:-Harmful vapors, evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
- Further information:- Contaminated extinguishing water must be disposed of in accordance with local regulations
|
Personal Precautions |
Use personal protective clothing |
|
Environmental Precautions |
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater. |
|
Clean Up Actions |
For large amounts: Pump off product. For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations. |
|
Handling |
No special measures necessary provided product is used correctly |
|
Storage |
Keep container tightly closed and in a cool place. |
| Protection against fire and explosion | No special measures necessary |
|
Respiratory protection |
Respiratory protection in case of vapor/aerosol release. |
|
Hand protection |
Chemical resistant protective gloves (EN 374) e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinyl chloride (0.7 mm) and other. Manufacturer's directions for use should be observed because of great diversity of types. |
|
Eye protection |
Safety glasses with side-shields (frame goggles) |
| General safety and hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is recommended |
|
Odour |
Odourless |
|
Appearance |
Liquid Pale yellow, soluble in water |
|
Flash point |
>100 °C (>212 °F) (DIN 51758) |
|
Ignition temperature |
>200 °C (>392 °F) (DIN 51794) |
|
pH (20°C, 68 °F) |
6-8 |
|
Miscibility with water |
Miscible in all proportions |
|
Specific gravity (water=1) |
> 1 |
|
Solidification temperature |
Approx -20 °C (-4 °F) |
| Partitioning coefficient | -2 |
| Viscosity, kinematic (mm2/s) | Approx 600 (23 °C, 73.4 °F) |
- Hazardous reactions:- No hazardous reactions when stored and handled according to instructions.
- Hazardous decomposition products:- No hazardous decomposition products if stored and handled as prescribed/indicated.
|
LD50, oral (rat) |
> 2.000 mg/kg |
|
Primary skin irritation (rabbit) |
Non-irritant |
|
Primary irritations of the mucous membrane (rabbit) |
Non-irritant |
|
Toxicity to fish, Brachydanio rerio, LC50 (96 h): |
>100 mg/l |
|
Microorganisms / |
Inhibition of degradation activity in activated sludge is not to be anticipated during correct introduction of low concentrations |
| Persistence and degradability, Elimination information | |
|
Test method |
OECD 302B; ISO 9888; 88/302/EEC,part C, |
|
Method of analysis |
DOC reduction |
| Degree of elimination | 10 % (28 d) |
| Evaluation | Poorly biodegradable |
|
Disposal of product |
Must be dumped or incinerated in accordance with local regulations. |
|
Disposal of containers |
Uncontaminated containers can be re-used. Containers that cannot be cleaned should be disposed of in the same manner as the product. |
Not classified as hazardous under transport regulations ( ADR, RID, IMDG, DGR )
Not subject to labeling according to Regulations of the European union (Labeling)
LABELING ACCORDING TO EC DIRECTIVES:
Symbol: Xn, Harmful
R-phrases:
R65:Harmful: may cause lung damage if swallowed.
S-phrases: S2: Keep out of the reach of children.
S23: Do not breathe gas/fumes.
S24: Avoid contact with skin.
S62: If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
This Safety Data Sheet does not constitute a workplace risk assessment. All information is given in good faith but users must satisfy themselves that there are no circumstances requiring additional information or precautions or the verification of details.
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.