Bitumen Remover Cleaner

Part No: RXSOL-20-1004-025

Specifically formulated to reduce labour costs by swiftly breaking deposits enabling them to be easily flushed away with water. It can be diluted up to a maximum of 18-1 with paraffin or diesel, or for extra economy it can be diluted up to 6-1 with w

Category
Tank Cleaner

Bitumen Tar Remover  has been specifically formulated to reduce labour costs by swiftly breaking deposits enabling them to be easily flushed away with water. It can be diluted up to a maximum of 18-1 with paraffin or diesel, or for extra economy it can be diluted up to 6-1 with water. This is suitable for valeting shops, boiler houses, asphalt manufacturers, all garages and workshop floors, building contractors, tankers and equipment, local authorities and plant operators.

RXSOL Bitumen Remover is a powerful solvent-based cleaner specially formulated to dissolve and remove bitumen, asphalt, and tar deposits from tools, machinery, vehicles, and metal surfaces. Its fast-acting chemical blend penetrates hardened residues, softening and loosening them for easy removal, thereby reducing manual labor and cleaning time significantly.

This product is commonly used in the marine hold cleaning, construction, road maintenance, refinery, and transport sectors, where tar and asphalt buildup frequently occurs.

Application

This product also can be used as a Bitumen Emulsifier .

Recommendation Dose for general deposition : 

  200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

Each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

 

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-20-1004-025 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-20-1004-025 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

 

Other Areas of Application of Bitumen Remover Cleaner

  • Road construction and paving equipment
  • Asphalt plant mixers and transport tankers
  • Bitumen sprayers, rollers, and brushes
  • Truck bodies and chassis
  • Tools, shovels, and hand-held equipment contaminated with bitumen or tar
Dose

When hot bitumen is mixed with 0.03 % of  RXSOL-20-1004-025, becomes water miscible. Or RXSOL-20-1004-025 can also blend with hot water to make emulsion with BITUMEN.

Technical specifications
Parameter Typical Value
Appearance Clear amber liquid
Odor Solvent
Specific Gravity 0.85 – 0.95
Solubility Emulsifies with water
pH Neutral
Packing sizes
Bitumen Remover Cleaner manufacturer and supplier. RXSOL Bitumen Remover available in 5, 25, 50 Lts packing.
Supply location

Bitumen Remover Cleaner manufacturer and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham Kandla, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Muscat Oman, Nairobi Kenya Africa
#BITUMENREMOVER_Dubai

Remarks / Precaution

Note


Quantities of  RXSOL-20-1004-025 is completely depends on approximate value of BITUMEN .

Our cutting-edge bitumen remover is designed to efficiently eliminate stubborn bitumen deposits from various surfaces. As a leading solution in the field, our bitumen remover product offers exceptional performance in breaking down and loosening bitumen, asphalt, and tar substances. Whether for industrial equipment, vehicles, or construction materials, our powerful bitumen remover effectively dissolves and lifts the most resilient bituminous substances. Trust our expertise in providing a reliable and innovative bitumen removal solution that meets your toughest cleaning challenges with ease.

 

Key Features of Bitumen Remover

  • High Solvency Power: Quickly breaks down hardened bitumen and asphalt deposits.
  • Economical: Can be diluted up to 18:1 with paraffin or diesel for regular use.
  • Water-Emulsifiable: For extra economy, it can be diluted up to 6:1 with water.
  • Labour-Saving Formula: Swiftly loosens deposits, reducing cleaning time and effort.
  • Multi-Surface Compatible: Safe for use on metal, concrete, and painted surfaces when used as directed.
  • Easy Rinsing: Deposits can be easily flushed away with water after application.

Safety Data (MSDS)

Product Name RXSOL-20-1004-025
Product Type Bitumen Remover Cleaner

Company Details :

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Muscat, Nairobi

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

 COMPONENTS-CHEMICAL NAMES AND COMMON NAMES

(Hazardous Components 1% or greater; Carcinogens 0.1% or greater)

CAS Number
SARA
III LIST

Applicable PEL-OSHA

Exposure Limits TLVACGIH
Carcinogen
Ref. Source **

ETHYLENE GLYCOL MONOBUTYL ETHER

 111-76-2 Yes 25 25 d
MONOCHLOROTOLUENE (MIXED ISOMERS) 25168-05-2 No N/E N/E d
ORTHO ISOMER 95-49-8 No N/E 50 d
PARA ISOMER 106-43-4 No N/E N/E d
SOLVENT NAPHTHA (PETROLEUM) HEAVY AROMATIC 64742-94-5 No N/E N/E d

PRIMARY ROUTES OF ENTRY:

[ ] INHALATION [ ] INGESTION [ X ] SKIN ABSORPTION [ X ] EYE [ ] NOT HAZARDOUS

ACUTE EFFECTS

Systemic: CNS depression producing headache, dizziness, numbness, loss of consciousness.

Inhalation:

Irritation of upper respiratory tract. Exposure to high concentrations may cause systemic toxicity. Aspiration into lungs can cause chemical pneumonitis 

Eye Contact:

Irritation.

Skin Contact:

Dermal irritation & dermatitis attributable to defatting of skin.

Ingestion:

Irritation of gastrointestinal tract. See also systemic effects above
CHRONIC EFFECTS: Chronic exposure to high concentrations may cause some liver or kidney disfunction
Medical Conditions Generally Aggravated by Exposure: Liver or kidney disease. May aggravate pre-existing irritation.

Eye  Contact:                     

Flush with water for 15 minutes. Get medical attention.

Skin Contact:

Flush skin with water then wash with soap and water. If irritation occurs, get medical attention.

Inhalation:

Remove to fresh air. If not breathing, administer artificial respiration. Get medical attention.

Ingestion

DO NOT INDUCE VOMITING. Drink 3 to 4 glasses of water. Get immediate medical attention. If vomiting occurs, keep head below hips to  prevent aspiration.

FLAMMABILITY as per USA FLAME PROJECTION TEST (aerosols) 

N/A

N/Auto Ignition TemperatureE
Auto Ignition Temperature
 
 N/D
Flammability Limits in Air by % in Volume:  
% LEL: N/D
% UEL: N/D
FLASH POINT AND METHOD USED (non-aerosols): 141ºF (TCC)
SPECIAL FIRE FIGHTING PROCEDURES: Burning product may give off nox - ious & toxic fumes. Firefighters should wear NIOSH approved self -contained breathing apparatus.
EXTINGUISHER MEDIA: Water fog, foam, dry chemical or CO2. Burning product may float on water.
Unusual Fire & Explosion Hazards: Burning product may float on surface of water and spread fire to other areas.

PERSONAL PRECAUTIONS

Avoid contact with skin and eyes. Provide eyewash bottle with clean water. For personal protection, see section 8.

ENVIRONMENTAL PRECAUTIONS

Do not allow to enter drains, sewers or watercourses. If substance has entered a water course or sewer or contaminated soil or vegetation, advise the appropriate authorities.

SPILL CLEAN UP METHODS

 Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. Absorb in vermiculite, dry sand or earth and place into containers. Contact waste disposal services.

Steps To Be Taken If Material Is Spilled Or Released:

Do not allow large spills to contaminate sewers, ground or surface waters. Contain spill & soak up in inert absorbent material. Place in leak-proof  containers for proper disposal.

Waste Disposal Methods:

Dispose of in accordance with all local, state and federal regulations
Precautions To Be Taken In Handling & Storage: Store in original shipping containers. Keep closed when not in use. Shelf life 1 year. Protect from extreme heat and cold
Other Precautions &/or Special Hazards: KEEP OUT OF REACH OF CHILDREN. Read & follow label directions. Do not cut, weld or drill on drums whether full, part full or empty.

Respiratory Protection (specify type):

None required under normal conditions of handling and use.

Protective Gloves:

Solvent resistant

Eye Protection:

Chemical goggles.
Ventilation Requirements: Special ventilation not normally needed. If required to maintain concentrations below specified levels use explosion proof ventilation.
Other Protective Clothing & Equipment: Solvent resistant, as needed. Eyewash station and safety shower
Hygienic Work Practices: Do not eat, drink or smoke in work area. Wash hands after handling.

Physical Properties  Clear  Liquid
Odour Hydrocarbon

Boiling Point:

180°C

Specific Gravity (H2O=1): 

0.85-0.91

Vapor Pressure:

 902 hPa at 20°C

Vapor Pressure (Non-Aerosols)(mm Hg and Temperature):

N/D

Vapor Density (Air = 1):

>1
Evaporation Rate ( BUAC = 1): 1
Solubility in Water: Insoluble
Water Reactive: No
Appearance and Odor: Clear amber, non-viscous liquid with aromatic solvent odor.

STABILITY

[ X ] STABLE [ ] UNSTABLE

HAZARDOUS POLYMERIZATION

[ ] WILL [ X ] WILL NOT OCCUR

Incompatibility (Mat. to avoid):

Strong oxidizing agents.
Conditions to Avoid: Heat, sparks and open flame

Hazardous Decomposition Products:

Oxides of nitrogen, carbon, hydrogen chloride, unidentified organics.

 

Acute   oral toxicity                   Symptoms: Gastrointestinal disturbance, Risk of aspiration upon vomiting., Pulmonary failure possible after aspiration of vomit.
Acute dermal toxic Acute toxicity estimate : 1,134 mg/kg
Skin corrosion Drying-out effect resulting in rough and chapped skin. Mixture causes  skin irritation.
Toxic Effects on Humans Acute Potential Health Effects: Skin: Causes skin irritation. Can be absorbed through skin. Eyes: Causes eye irritation. Inhalation: Vapor causes respiratory tract and mucous membrane irritation.
Special Remarks on Chronic Effects on Humans Detected in maternal milk in human. Passes through the placental barrier in animal. Embryotoxic and/or foetotoxic in animal. May cause adverse reproductive effects (male and femael fertility (spontaneous abortion and fetotoxicity) and birth defects based animal data.
Further information
After absorption:		 Headache, somnolence, Dizziness, euphoria, agitation, spasms, narcosis Effect potentiated by: ethanol Damage to: Kidney, Central nervous system, Liver

Toxicity to Fish              No information available.
COD and  BOD 5                                          Not Available
Products of Biodegradation: No information available.
Mobility in soil No information available.
Results of PBT and vPvB assessment Substance(s) in the mixture do(es) not meet the criteria for PBT or vPvB according to Regulation (EC) No 1907/2006, Annex XIII, or a PBT/vPvB assessment was not conducted.
Other adverse effects Additional ecological information
Discharge into the environment must be avoided.

 

Waste treatment Method Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself

 DOT/ADR

UN        Number                                          1993
Proper shipping name Combustible liquid, n.o.s. (Distillates, Hydrotreated Heavy Naphthenic, Heavy Aromatic)
Hazard Class Combustible liq
Packing group III

IATA

UN        Number                                          1993
Proper shipping name Combustible liquid, n.o.s. (Distillates, Hydrotreated Heavy Naphthenic, Heavy Aromatic)
Hazard Class Combustible liq
Packing group III

IMDG/IMO

UN        Number                                          1993
Proper shipping name Combustible liquid, n.o.s. (Distillates, Hydrotreated Heavy Naphthenic, Heavy Aromatic)
Hazard Class 8
Packing group III
Special precautions for user -

Read safety instructions, SDS and emergency procedures before handling.
Transport Annex II of MARPOL 73/78 and
the IBC Code :

Not established.

Fedral and State Regulation  Commission Decision 2000/532/EC as amended by Decision 2001/118/EC establishing a list of wastes and hazardous waste pursuant to Council Directive 75/442/EEC on waste and Directive 91/689/EEC on hazardous waste with amendments.
Guidance Workplace Exposure Limits EH40. Approved Classification and Labelling Guide (Sixth edition) L131. Safety Data Sheets for Substances and Preparations. Health and environmental listings
Health and environmental listings Regulation (EC) 689/2008 of the European Parliament and of the Council of 17 June 2008 concerning the export and import of Cleaning chemicals (as amended). Water hazard classification .
Chemical safety assessment No chemical safety assessment has been carried out.

 

HMIS                               
Health Hazard : 3
Fire Hazard : 3
Reactivity : 0
Personal Protection : H

 

Fire :                              
Health Hazard : 3
Fire Hazard : 3
Reactivity : 0
Specific Hazard : ..

Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.