Part No: RXSOL-20-2002-210
Specially formulated for cleaning of oily greasy surface of tanks.
SEA SOLVENT CLEAN is SOLVENT TANKCLEAN EMULSIFY also known as HEAVY DUTY TANK CLEANER is strong degreaser and tank cleaner for all types of petroleum and aromatic based compound. RXSOL brand SEA SOLVENT CLEAN - SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER differs from other as it contains Rice Bran based long chain emulsifer along with other emulsifer which is used in general common brand in market. Due to presence of long chain emulsifier petroleium derivativetives are not only quickly degreasing from surface but also easily mixed and dissolved into water, which results less hydrocarbon traces on tank surface.
SEA SOLVENT CLEAN RXSOL SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER is premium quality product specially formulated for cleaning of oily greasy surface of tanks. to emulsify all types of oils using hot or cold processes. Field area double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.
Highly concentrated product only ½ to 1 litre of RXSOL-20-2002-210 required per tone of water, when ROCK and Roll tank cleaning method adopted. Refer below " Dose " block to view complete method.
SEA SOLVENT CLEAN RXSOL SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER is formulated for cleaning double bottom, deep and wing tanks used for petroleum fuel oils. Aromatic chain compound have special feature and its chain bonding in molecules are very strong, so its cleaning always required special type of cleaner.
Our team is continiously working on daily problem faced by customer, and observed that after using of SEA SOLVENT CLEAN SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER all oil base compound are emulsifed and cleaned out. But if tanks / vessel are required complete removal of hydrocarbon even traces, smell from tank surface then repetition of tank cleaning through RXSOL-16-1011-210 .
Directions for Use and Dose Rates: RXSOL-20-2002-210 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.
Soak Method: for heavy soil put parts into undiluted RXSOL-20-2002-210, for general soiling use a solution of 10-30% RXSOL-20-2002-210 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spraying Method: Use neat RXSOL-20-2002-210 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.
Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1.First of all heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close all suction and discharge valves .
4.1stDose Fill the tanks by ½ to 1 litre RXSOL-20-2002-210 per tone of water through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of RXSOL-20-2002-210, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely
RXSOL-20-2002-210 is an extremely effective liquid blend of concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for BOILERS,MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.
SOLVENT TANKCLEAN EMULSIFY heavy duty solvent and propreitory blend of Emulsifier. RXSOL SOLVENT TANKCLEAN EMULSIFY manufacturer and supplier in India, UAE, OMAN, CANADA - Mumbai, Kolkata Ennore, Chennai Ennore, Fujairah, Visakhapatnam Gangavaram, Gandhidham Sikka Jamnagar, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka, Canada BC, Nairobi Kenya Mombasa Africa
SOLVENT TANKCLEAN EMULSIFY is classified SOLVENT BASED SEACLEAN Tank Clean chemicals.
SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER dilution ratio 1 or 3 litres per ton of water, allow to reduce gas freeing operation double bottom, deep, and fuel oil tanks. In general, practice diluted SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER used together with mechanical Butterworth washing equipment to clean tank and gas-freeing operation.
Machinery engine room cleaning chemicals. Due to higher industrial cleaning strength of SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER, It can be use as a cleaner of bilges, pump rooms and machinery parts and many more oil effected area. SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER contains emulsifier with penetrating solvent it can be apply for wide range of applications.
For heavy contaminated bilge area use SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER directly on soiled area and give fiew minutes to get full emulsification process, This will helps to flush bilge area completly with water. Otherwise for light contamination dilute sea cleaner with water ( If possible hot water ) then spray on surface to get clean completely.
Industrial concentrate strength of SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER effectively works on lubricating oil, fuel and soot particels deposit in engine exhaust system. As SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER contain petrating solvent to eliminate Soot and Oily Residue from exhaust system. Availability of SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER on working station not only reduce mechanincal cleaning operation but also Minimize Hull & Abrasive Cleaning which is damaging finishes of all deposited surface area. Soot particles and unreactive unburned fuel oil are trapped by the filter medium and reduced to carbon dioxide and water vapor. To obtain good result periodic cleaning must required. SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER org plays a very important role in such cleaning.
Direct Injection Method for Tank cleaning through SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER :
Dose value of SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER can varies depends up on contamination and deposition of oil on the surface area. For tank cleaning " direct Injection Method " also one of the popular method. In this method, neat SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER can be injected directly from the drum through air-operated drum (barrel) pump. During this method this barrel pump can be connected to the pressure side of the automatic tank cleaning system line. Barrel Pump can be fixed at a predetermined rate as an injection rate of 0.1 0.2 liter SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER per 100 litres of tank wash water is sufficient. Cleaning time 2-6 hours. Finally wash and rinse the tank with water.
Direct Hand Spraying Method some time becomes necessary for cleaning of the heavily contaminated tank. On the other hand, we can also say that expert always selecting hand spray method before going to any other tank cleaning method to make there job easy. Expert shortlisting all tuff and heavily contaminated area and directly spraying neat SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER all over soiled areas. Then they are following another method like direct injection method, Recirculation method, Rock and roll method etc...
Recirculation Method for ship tank cleaning -
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) Then make solution SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER with water with percentage ratio of 2-6% SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.
Rock and Roll Method at sea cleaning for double bottom tank:
Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.
Pre-wash with Hot water ( 50 degrees C) is helpful before cleaning with SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER. This trick will help to remove excess of oil contaminates and also hot water releasing bond between metal and oil contamination. But never follow this step for crude oil, drying and semi-drying oils as these products can reverse cleaning effect with hot water. In this case, prewash with cold water should be applied to remove excess of oil from tank and metal surface area.
Highly concentrated product easily emulsify solvent and petroleum product. This products are classified as a degreaser and tank cleaner.
Safety Data (MSDS)
| Product Name | RXSOL-20-2002-210 |
| Product Type | SEECLEANER HEAVY DUTY TANK CLEANER - SOLVENT TANKCLEAN EMULSIFY |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Canada. Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Naphtha (petroleum)hydrosulfurized heavy |
30-60 |
64742-82-1 |
265-185-4 |
65, 66 |
Xn |
|
White spirit (low aromatic) |
30-60 |
64742-48-9 |
265-150-3 |
65, 66 |
Xn |
|
Fatty alcohol ethoxylate |
5-10 |
34398-01-1 |
500-084-3 |
41 |
41 |
*See Section 16
|
Environmental Hazards |
None. |
|
Human Health Hazards |
Moderates , may cause lung damage if swallowed. |
|
Note |
Person-related safety precautions required. |
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration Get medical attention in case of symptoms . |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating , Protective clothing require |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing ( On persistent symptoms ) |
Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
|
Extinguishing Media:- |
|
|
A. Suitable |
Foam ,dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
|
Cool endangered container with water |
Direct water jet on larger fire |
|
Protection of fire Fighter |
Masked with Air Respirator |
Care for environmental protection:Prevent material from reaching sewage system, holes and cellars. Dilute with much water. PROCEDURE for cleaning/collecting:Remove RXSOL SC 2002 with absorbent materials or mechanically .And dispose accordance with section , Then flush with water and ventilate well. NOTE : Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust , oil adsorbent).
|
Ensure adequate ventilation:- |
|
|
Handling |
Eyewash facilities require at workplace. |
|
Storage |
General Storage , container should be tightly. Protect from direct sunlight and heat flames. |
|
Methods of cleaning |
Flush Spill Area with Water. |
|
Note |
Keep Container Tightly Closed. |
|
ENVIROMENTAL PRECAUTION |
|
|
Readily Bio-Degradable , missible with water , low toxicity , No environmental problem on correctly usage. |
|
|
PERSONAL PROTECTION |
|
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
|
Note |
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. |
|
Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Keep away from foodstuffs, beverages and food |
|
|
Protection of hand |
Protective gloves , wash hand after touch. |
|
Eye protection |
Tightly sealed safety glasses |
Product Properties:-
|
Appearance |
Clear liquid / Low viscous |
|
|
Odour |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 0.89 |
NOTE : SHELF LIFE 10 YEARS |
|
Boiling Point |
Materials Boils At 160°C |
EFFICIENCY: |
|
Compatibility |
|
A . SEA WATER 70% |
|
Metal |
No known effect |
B. FRESH WATER 84% |
|
pH |
6 +0.5 |
|
|
PACKAGING |
Order No.: |
Size (in litres) |
|
|
RXSOL SC 2002 |
25 , 30 , 210 |
|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
|
Note |
No decomposition if used according to specifications. |
|
Skin Irritation |
irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
|
(All above information as per data available with us) |
|
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
|
Water hazard class 2 (self-assessment) |
Hazardous for water. |
|
Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil. |
|
This material must be disposed with local national regulations.Product Recommendation ( Recommended cleaning agent : water ) Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations. Can be reused or recycled after cleaning
• Marine pollutant: No
• Transport/Additional information
• Hazard designation of product: Xi Irritant.
• Irritating to eyes and skin.
• Safety phrases
Keep out reach of children
If swallowed, seek medical attention immediately
Harmful if swallowed
In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention.
Do not Breathe
After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
Risk of serious damage to eyes
• National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.