Part No: RXSOL-20-2007-210
Very strong low foaming cleaner, Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oi
RXSOL-20-2007-210 is a very strong low foaming cleaner, Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.
Powerful solvency
Moderate evaporation rate
Low viscosity
High dilution ratio
Low surface tension
Coupling ability
Wide range of applications
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-210 is by direct injection followed by recirculation washing, using tank cleaning machines.
RXSOL is HCF remover manufacturer and supplier. We are keeping ready stock of this materials at our following location - Mumbai, Sikka, Mundra, Kandla, Gandhidham, Surat, Hazira, Pirpav, JNPT, Goa, Manglore, Kochin, Vizag - Visakhapatnam, Gangavaram, Ennore http://rxmarine.com/kamarajar-port-ennoreport , Chennai, Fujairah, Dubai, Sharjah, Abu Dhabi, Middle East. We have our distributor and agent for supply of HCF remover in Istanbul, Turkey.
For export of HCF remover we are very popular due to its cost effectiveness.
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-210 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Prepare 0.1-0.5 % cleaning solution with fresh water, leave the solution on the surface for 5-10 minutes than wipe away. Heat the solution to get better results up to 60°C. It is not corrosive so it can be used on every surface.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
OR
Recirculation Method: Prepare 0.1-0.5 % cleaning solution with fresh water and circulate or spray with water jets to clean contaminated tank surfaces. Recirculate at least 3-4 hours around 30-60 °C. The solution can be re-used until it is no longer effective. After circulation make the test and rinse the tank with fresh or DI water depending on the next Cargo. For Veg-Palm Oil Cleaning : Circulate the tank with cold sea water 1.5 hours, than circulate the tank with hot sea water (50-60 o C ) for 1.5 hours. Finally, circulate the tank with HCF REMOVER 1 (One) hour around 40-50 C.
Spot Cleaning: Depending upon the contamination, HCF REMOVER should be sprayed undiluted or diluted between 0.1-10% and allowed to soak on the area for 20 – 30 minutes. Finally, rinse the tank with plenty of hot fresh water around 30-40 minutes. For small residues and for last Hydro Carbon Free issues, usage will be around 0.1%. Afterwards tanks must be washed down with plenty of fresh water. For cleaning tuff cargo residues prepare a solution 5-10 % with hot fresh water and apply same procedures with spot cleaning. While cleaning and rinsing the tank surfaces, the efficiency of the solution can be increased by using warm water up to 60°C.
**Use a strainer at the pump stack when circulating any solution.**
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.
HCF REMOVER tank cleaning marine chemicals supplier in Mumbai, Pirpav, JNPT, Mundra, Kandla, Sikka Jamnagar, hazira, Kolkata, Haldia, Paradip, Chennai, Ennore, Karaikal, visakhpatnam, Manglore INDIA, Fujairah, Sharjah, Dubai, Ajman UAE Middle East, Sohar, Muscat OMAN Barka, Canada
HCF REMOVER is a highly concentrated natural based cargo tank cleaner with a neutral pH. It is free from chlorinated/aromatic hydrocarbons, caustic and alkalines. It can be used for the cleaning of palm oil, vegetable oil, fish oil and soybean oil from cargo tank surfaces.
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-HCF has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
-
Contains wetting agents.
Note:- Completely miscible with sea water.
Safety Data (MSDS)
| Product Name | RXSOL-20-2007-210 |
| Product Type | HCF REMOVER |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Chennai, Kolkata, Kandla, visakhapatnam, Fujairah UAE, Muscat Oman
| Phone | +91 22 27815540 / 27815542 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
* Chemical characterization
* Description: Mixture of the substances listed below with harmless additions.
* Dangerous components:
CAS : 111-76-2 2-butoxyethanol Xn; R 20/21/22-36/38 5-10% EINECS : 203-905-0
CAS : 112-34-5 2-(2-butoxyethoxy)ethanol Xi; R 36 2.5-5% EINECS : 203-961-6
CAS : 34590-94-8 Dipropylene Glycol Methyl Ether 2 - 5%
Fatty Alcohol Mixture derivative : 10 - 20%
*See Section 16
|
Chemical characterization |
|
|
Description |
Mixture of substances listed below with nonhazardous additions. Cleansing agent |
|
Dangerous components |
Non-ionic surfactants Xn, Xi; R 22-41 10-25 % CAS: 111-76-2 |
|
Einecs |
203-905-0 2-butoxyethanol Xn, Xi; R 20/21/22-36/38 2.5-10% |
|
General Information |
Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours therefore medical observation for at least 48 hours after the accident. |
|
After inhalation |
Supply fresh air and consult doctor in case of complaints. |
|
After skin contact |
Generally the product does not irritate the skin. |
|
After eye contact |
Rinse opened eye for several minutes under running water. Then consult a doctor. |
|
After swallowing |
Call for a doctor immediately |
|
Suitable extinguishing agents |
Non Flammable can be use all kinds of fire extinguisher like CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. |
|
Protective equipment |
No special measures required. |
|
Person-related safety precautions |
Wear protective clothing. |
|
Measures for environmental protectio |
Dilute with plenty of water. |
|
|
Do not allow to enter sewers/ surface or ground water. |
|
Measures for cleaning/collecting |
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to item 13.Ensure adequate ventilation.Dispose Of The Material Collected According To Regulations. |
|
Handling |
|
|
Information for safe handling |
Store in cool, dry place in tightly closed condition. |
|
Fire and explosion protection |
No special measures required. |
|
Storage |
|
|
Store rooms and receptacles |
No special requirements. |
|
Storage in one common storage facility |
Not required. |
|
Further information about storage conditions |
None. |
|
Additional information about design of technical facilities: No further data; see item 7. • Ingredients with limit values that require monitoring at the workplace: 111-76-2 2-butoxyethanol WEL Short-term value: 50 ppm Long-term value : 25 ppm • Additional information : The lists valid during the making were used as basis. • Personal protective equipment: • General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. • Respiratory protection : Not required. • Protection of hands : Protective gloves, The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. • Material of gloves : The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. • Penetration time of glove material : The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. • Eye protection : Safety glasses • Body protection : Protective work clothing |
|
General Information |
|
|
Form |
Fluid / Liquid |
|
Colour |
Yellowise / Clear |
|
Odour |
Characteristic |
|
Change in condition |
|
|
Melting point/Melting range |
Undetermined. |
|
Boiling point/Boiling range |
171°C |
|
Ignition temperature |
240°C |
|
Self-igniting |
Product is not selfigniting. |
|
Danger of explosion |
Product does not present an explosion hazard. |
|
Vapour pressure at 20°C |
23 hPa |
|
Density at 20°C |
1.00 g/cm³ |
|
Solubility in / Miscibility with |
|
|
Water |
Fully miscible. |
|
pH-value at 20°C |
> 7 |
|
Thermal decomposition / conditions to be avoided |
No decomposition if used according to specifications. |
|
Dangerous reactions : No dangerous reactions known. |
|
|
Dangerous decomposition products |
Carbon monoxide and carbon dioxide. |
|
Acute toxicity |
Primary irritant effect: |
|
On the skin |
No irritant effect. |
|
On the eye |
No irritating effect. |
|
Sensitization |
No sensitizing effects known. |
|
Additional toxicological information |
When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us. Harmful if swallowed. |
|
Classification Guidelines for Preparations as issued in the latest version |
No decomposition if used according to specifications. |
|
General notes |
HCF REMOVER is Readily Biodegradable. Its Biodegradability - Biodegradation is 90 - 100 Day. Danger to drinking water. |
|
Product Recommendation |
Must not be disposed of together with household garbage. |
|
Uncleaned packaging Recommendation |
HCF REMOVER is Readily Biodegradable, But avoid mixture from drinking water contact. |
|
Recommended cleansing agents |
Water, if necessary together with cleansing agents. |
• Land transport ADR/RID (cross-border)
• ADR/RID class : -
• Maritime transport IMDG:
• IMDG Class : -
• Marine pollutant : No
• Air transport ICAO -TI and IATA-DGR
|
Labelling according to EU guidelines |
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. |
|
Code letter and hazard designation of product |
Xn Harmful |
|
Risk phrases |
22 Harmful if swallowed. |
|
Safety phrases |
23 Do not breathe gas / fumes / vapour / spray (appropriate wording to be specified by the manufacturer). 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. 60 This material and its container must be disposed of as hazardous waste. |
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. • Relevant R-phrases. 20/21/22 Harmful by inhalation, in contact with skin and if swallowed..22 .Harmful if swallowed. 36/38 Irritating to eyes and skin. 41 Risk of serious damage to eyes.