Dechlor Adsorbent Beads 204

Part No: RXSOL-24-1905-160

Rapid removal of hydrogen chloride from dry gas, liquefied gas LPG, liquid hydrocarbons, and synthesis gas in reforming units.

Category
Clean Air deodorizer

These Adsorbent catalysts are non-regenerative adsorbent is the preferred product for removing trace HCl from Olefin-containing hydrocarbon streams. RXSOL Adsorbent Beads provides the highest chloride capacity in commercial service, while significantly minimizing green oil and organic chloride formation. Features and benefits include:

Optimized pore size distribution leading to higher capacity. High degree of macro-porosity for rapid adsorption and short mass transfer zone. High surface area substrate to extend bed life. Customized adsorbent for ultra low activity in process streams.

Application

This RXSOL Adsorption Beads are the latest generation adsorbent for impurity removal.

Adsorbent is used to treat the net gas and LPG produced in catalytic reforming units, the reactor effluent from process units, and various liquid hydrocarbon streams.

Dechlorination catalyst is prepared using pseudo boehmite and metal active components with excellent dechlorination performance as raw materials by using a ball rolling process; It has the characteristics of rapid reaction with hydrogen chloride. The remarkable characteristics of this product are large specific surface area, rapid reaction, strong adaptability, high chlorine capacity, and wide application range. It can be used under different pressures and can be used to remove hydrogen chloride from a wide range of materials.

Mainly used in the rapid removal of hydrogen chloride from dry gas, liquefied gas (LPG), liquid hydrocarbons, and synthesis gas in reforming units, isomerization units, dehydrogenation units, and synthesis gas units; In particular, an ideal adsorbent for the removal of hydrogen chloride from olefin containing materials can significantly reduce the generation of green oil and organic chlorides.

Dose
Dechlor Adsorbent Beads 204 removes chloride (primarily as hydrogen chloride, HCl, or chloride ions) through a high-affinity chemisorption and physical adsorption process onto its porous aluminum oxide surface.
 
How Dechlor Adsorbent Beads 204 Works
  • High Surface Area: Activated alumina features a porous structure with a high surface area (often exceeding 200 m²/g), providing extensive contact sites.
  • Chemically Active Sites: The surface reacts with gaseous or liquid contaminants (like HCl in industrial streams or chloride ions in water) to trap them permanently within the matrix.
  • Promoted Formulations: Special active promoters are often added to activated alumina to maximize chloride loading capacity and prevent unwanted side reactions like green oil formation.
Technical specifications

Sr. No.

Description

Limit

Results

1

Particle Shape

White Spheres

White Spheres

2

Size of Granules (Diameter)

2–5 mm

2–5 mm

3

Bulk Density (g/cc)

Max. 0.75

0.73

4

Attrition Loss

Max. 0.5%

0.3%

5

Moisture at 150°C

Max. 2%

0.78%

6

Adsorption Capacity at 60% RH (by wt.)

Min. 20

23.4%

7

Surface Area (m²/g)

Min. 350

381

8

Pore Volume (ml/g)

Min. 0.4

0.45

9

Bed Crushing Strength (%)

Min. 90

93

Chemical Analysis

Sr. No.

Description

Limit

Results

1

Al₂O₃

Min. 93.5

98.6

2

Na₂O

Max. 0.35

0.23

3

Fe₂O₃

Max. 0.10

0.06

4

SiO₂

Max. 0.015

0.007
Supply location

Chlorine Removal Adsorbent Desiccants manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Chlorine Removal Adsorbent Desiccants at a competitive price from us. We have ready stock of Chlorine Removal Adsorbent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Chlorine Removal Adsorbent 204 supplier in Iraq, Kuwait, Qatar, GCC, Middle East.

Industrial area
Surface area is in the range 345-415. Because it has a higher capacity for water than Silica Gel at elevated temperatures it is mainly used as a desiccant for warm gases including air. In many commercial applications zeolitic materials have now replaced it.
 
Application:
Purification of gases and liquids (removal of metallic traces, TBC and HF compounds).
Drying of organic liquids such as LPG, propylene, butene, steam cracked liquids, cyclohexane, gasoline, chloro- and fluorohydrocarbons, aromatic solvents.
Drying of air and gases such as steam cracked gases, catalytic reforming recycle gas, synthesis gas, natural gas, CO2.
Drying of organic liquids as LPG, aromatics, steam cracked liquids, gasoline, chloro- and fluorocarbons.
Drying of air and gases as steam cracked gases, catalytic reforming recycle gases, synthesis gases, methyl chloride, natural gas, LNG, etc.
Drying of hydrogen, oxygen, nitrogen, CO2, etc.
Purification of gases and liquids (removal of metallic traces, BF3, TBC, HCl, HF and fluorinated hydrocarbons).
Catalyst for Claus conversion in sub dew point processes.
Air drying (PSA, TSA)
Instrument air, supersonic wind tunnel, compressed air
Gas drying Air separation plants, inert and rare gases, Hydrogen, oxygen, nitrogen, CO2.
Natural gas in production and compression plants, LPG, LNG.
Aromatics, naphtha cuts and cracked gas.
 
Silica Gel: We manufacture silica gel blue, white and orange beads and crystals for the moisture-adsorbing process from industrial air, gases and any product packaging.

Activated Alumina Balls: Activated Alumina is counted in the list of effective adsorbents and desiccants used in several applications for removing moisture and purifying the products.
Activated alumina will never disintegrate, shrink or swell when engrossed in water.
Mainly used for removing “Arsenic & Fluoride Removal” from water and used as an “Air Drying” desiccant.

Molecular Sieves Beads/Pellets: This desiccant can easily remove impurities from many industrial and natural gases, solvents & liquids.

The types of molecular sieves desiccants offered by Sorbead India include 3A, 4A, 5A, and 13X molecular sieves, carbon molecular sieves, and molecular sieve powder, which are available in the form of beads, pellets, and powder.

Carbon Molecular Sieve: Sorbead India offers qualitative carbon molecular sieves, especially for nitrogen generation PSA (Pressure Swing Adsorption) Plants. N2 Purity: 99.99%

Molecular Sieve Powder: Zeolite powder is an excellent moisture scavenger for polyurethane coatings, adhesives, sealants and elastomers. It is in powder form.
Remarks / Precaution

Benefits of using RXSOL Dechlor Adsorbent Beads for hydrogen chloride gas extraction and adsorption

  • Low Effluent Levels: Capable of reducing chloride output down to trace levels  in proper gas-phase designs.
  • Mechanical Strength: Resists crushing, softening, or disintegrating during long cycles in fixed beds or aqueous environments.
Note

Where are Dechlor Adsorbent Beads 204 used?

  • Petrochemical & Refining: Used in fixed guard beds to strip HCl from reformer hydrogen gas streams, liquid hydrocarbons, and feedstocks to prevent equipment corrosion and catalyst poisoning.
  • Water Treatment: Applied to capture residual chloride or chlorine-related ions and anions from industrial process water or wastewater.
  • Air Purification: Helps remove gaseous chlorine and halogenated compounds from industrial exhaust or manufacturing environments.

Safety Data (MSDS)

Product Part Number RXSOL-24-1905-160
Product Name Dechlor Adsorbent Beads 204

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujaiarh, Muscat

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

PRODUCT IDENTIFICATION PRODUCT NAME: Activated Alumina 

COMPONENTS

 CAS NO. %BY WEIGHT
Aluminum oxide  1344-28-1 60-90
Sodium Carbonate 497-19-8 20-25
Aluminum silicate 14504-95-1 0.2

EYES:

Can cause mild irritation, especially when wet.

SKIN:

 Can cause mild irritation.

INHALATION:

Can cause mild upper respiratory tract irritation.

INGESTION:

 Can cause mild irritation.

Alumina is a low health risk by inhalation and should be treated as a nuisance dust as specified by the ACGIH. This product contains total silicates at 1% by weight.

EYES:

Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician.

SKIN:

 Wash with soap and water for at least 15 minutes. Consult a physician if irritation persists.

INHALATION:

Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician.

INGESTION:

 If swallowed, dilute by drinking large amounts of water. Never give,anything by mouth to a convulsing or unconscious person. Do not induce vomiting. Consult a physician.

SUITABLE EXTINGUISHING AGENTS:

Use fire fighting measures that suit the environment.

PROTECTIVE EQUIPMENT:

Wear self-contained respiratory protective device. Wear fully protective suit.

ACCIDENTAL RELEASE MEASURES:

Person-related safety precautions: Wear protective clothing. 
Measures for environmental protection: No special measures required.
Measures for cleaning/collecting: clean up using dry procedures; avoid dusting.
Additional information: No dangerous substances are released.

Alumina is a low health risk by inhalation and should be treated as a nuisance dust as specified by the ACGIH. This product contains total silicates at 1% by weight.

HANDLING:
 

Ensure good ventilation/exhaust at the workplace. Prevent formation of dust. Provide suction extractors if dust is formed.

Protection against explosions and fires:

No special measures required.

STORAGE:

Keep material dry. Storage in one common storage facility is not required.

Personal protective equipment. Do not inhale dust. Avoid contact with the eyes. Use suitable respiratory protective device in case of insufficient ventilation.
Short term filter device: Filter P2. Protection of hands: impervious gloves. Eye protection: Safety glasses.

APPEARANCE: Off-white, beads/balls
BOILING POINT:  Undetermined
FREEZING POINT: 3,700°F (2038°C)
VAPOR PRESSURE:  Not applicable
AUTOIGNITING: Product is not self igniting
SPECIFIC GRAVITY: 3.2
pH: 10% in water 9.4-10.1
ODOR: Characteristic

CHEMICAL STABILITY CONDITIONS TO AVOID

A rise in temperature may result from contact with water.

INCOMPATIBILITY

None.

HAZARDOUS DECCSIPOSITION PRODUCTS

None if used according to specifications.
HAZARDOUS POLYMERIZATION:

None. Non-corrosive.

 N/A

 N/A

Collect in containers, bags, or covered dumpster boxes. If reuse or recycling is not possible, material may be disposed of at an industrial landfill.

Waste disposal key: 16 03 01  513 05
Disposal must be made according to official regulations.

 DOT

UN        Number                                          Not Applicable
Proper shipping name Activated Alumina Desiccants
Hazard Class Not regulated as dangerous goods.
Packing group Not Applicable

TDG

UN        Number                                          Not Applicable
Proper shipping name Activated Alumina Desiccants
Hazard Class Not regulated as dangerous goods.
Packing group Not Applicable

 IATA

UN        Number                                          Not Applicable
Proper shipping name Activated Alumina Desiccants
Hazard Class Not regulated as dangerous goods.
Packing group Not Applicable

IMDG/IMO

UN        Number                                          Not Applicable
Proper shipping name Activated Alumina Desiccants
Hazard Class Not regulated as dangerous goods.
Packing group Not Applicable

 

 NA

The above information is accurate to the best of our knowledge.however, since data, safety standards, and government regulations are subject
to change and the conditions of handling and use, or misuse, are beyond our control, seller makes no warranty, either express or implied, with
respect to the completeness  or  continuing  accuracy of the  information  contained  herein and disclaims all liability for reliance thereon. User
should satisfy himself that he has all current data relevant to his particular use.