Part No: RXSOL-25-2208-210
Innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition
• Effectively removes Pet Coke Oily stain and Carbonesious deposits from cargo holds and tanks.
• Can also be efficiently used as a general purpose cleaner for surrounding area of ship hold.
• Acts quickly and thoroughly.
• Can safely be used on all metals and metal alloys.
• Non–flammable, non–toxic, non–conductive & non–volatile.
• Soluble in seawater and fresh water.
• No known effect on rubber or plastic compounds.
• May be combined with a specific range of other products.
• Cost effective, easy to apply and use.
Pet coke remover may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise, Pet Coke Remover can be used undiluted especially when deposition is heavy and hard spots persist.
Cleaning Procedure
Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of Pet Coke Remover is sufficient to cover a surface area of 8–10 square meters.
NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.
PROPERTIES
Pet Coke Remover is a concentrated liquid solution containing powerful surface active agents, a corrosion inhibitor and aqueous chemical agents.
Appearance / Color : Clear, light yellow liquid.
Specific gravity : 1.1–1.2 gr/cm3 at 20°C
pH : 11.5–12.5
Petcoke Cargo Hold cleaning chemicals supplier in Mumbai, JNPT, Surat - Hazira, Kandla, Mundra, Sikka, Navlakhi, Goa, Visakhapatanma, VIZAG - Gangavaram, Chennai - Ennore, Kakinada, Kolkata, Haldia, Paradip, Buz Buz. And in Middle East - Fujairah, Dubai, Sharjah, Abu Dhabi, Barka Muscat, Sohar Oman, Canada, Mombasa Kenya
#PetCokeRemover_SoharMuscat
#PetCokeRemover_FujairahDubai
#PetCokRemover_HaziraSurat
#PetCokeRemover_MumbaiParadipVizagChennai
Petcoke cargo hold cleaning chemicals is suitable and most popular in ship cargo vessel.
Cleaning Methods for Green Delayed Petcoke.
Green Petcoke is a unprocessed coke fresh out of the coker, Green Petcoke also known as raw or delayed petcoke. Green delayed petcoke is high in oil content so its cleaning is different and its cleaner is also varies from ordinary pet coke remover. Green delayed petcoke stubborn also leaves stains on the surface The longer it’s left, the more difficult it becomes. As soon as possible, thoroughly remove all of the residue with a high-pressure sprayer. Some types of petcoke, like the calcined variety, are fairly dry and easily cleaned from a ship’s cargo hold. Green delayed petcoke, however, is high in oil content.
Note : Before loading of green petcoke, application of RXSOL SLIP COAT on surface is a wise decision.
Which Product is suitable to CLEAN Green Pet Coke and its residual STAIN ::: Green Petcoke Remover - RXSOL-25-2204-210
RXSOL Protective Package is all you need for applying the solutions we provide including coveralls, gloves, googles, & particulate masks.
Pet Coke STAIN removal concept -
Coal and petcoke leaves stain, its removal is important task during hold cleaning operation. Our expert has 2 suggestion for removal of such stain from the surface.
1st use RX Tuff heavy-duty alkaline cleaner, which can apply as an emulsion, need time to take effect and are rinsed away with seawater. More than one application will be needed to remove stubborn stains.
2nd one solution is much more effective than 1st one step. Here our expert suggests using New ORG on the spotted area where the residue is tightly deposited on the surface. " New ORG -RXSOL-20-2020-025 " this product is specialized to react with oily residue where any alkaline cleaner fails to emulsify. Uses of New ORG chemicals for stain removal/cleaning principally dissolve and emulsify OIL RESIDUE stain completely which is resulting stain-free surface, Then without flushing with water follow 1st step.
A water-based heavy duty alkaline cleaner for removal of oily stains as pet coke and coal. Also contains a specialized blend of synthetic. surfactants The cleaning should take place as soon as the discharge is complete to maximize effectiveness.
Also effective on dried oil films. When cleaning from black oils to white oils and from black oils to cargo grain
Safety Data (MSDS)
| Product Name | : | Pet Coke Remover |
| Product Type | : | Cargo Hold cleaning detergent chemicals |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
http://rxmarine.com/Pet-Coke-remover-ship-hold-cleaning-chemicals
Stock Point : Kolkata, Mumbai, Chennai, Visakhapatnam, Gangavaram, Kandla, Fujairah, Muscat SOAHAR
| Phone | : | +91 22 27815542 / 41 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com |
| Chemica Name | CAS # | % BY WEIGHT |
| NaOCl | 7681-52-9 | 40-50 |
| Butyl Cellosolve | 111-76-2 | 20-30 |
| Proprietary Surfactant | NA | 40-50 |
| Eye | Can cause permanent eye injury. Symptoms include stinging, tearing, redness, and swelling of eyes. Can injure the cornea and cause blindness. |
| Skin | Can cause permanent skin damage. Symptoms may include redness, burning, and swelling of skin, burns, and other skin damage. Additional symptoms of skin contact may include: skin blistering, hair loss, Passage of this material into the body through the skin is possible, but it is unlikely that this would result in harmful effects during safe handling and use. |
| Swallowing | Swallowing this material may be harmful or fatal. Symptoms may include severe stomach and intestinal irritation (nausea, vomiting, diarrhea), abdominal pain, and vomiting of blood. Swallowing this material may cause burns and destroy tissue in the mouth, throat, and digestive tract. Low blood pressure and shock may occur as a result of severe tissue injury. |
| Inhalation | It is possible to breathe this material under certain conditions of handling and use (for example, during heating, spraying, or stirring). Breathing this material may be harmful or fatal. Symptoms may include severe irritation and burns to the nose, throat, and respiratory tract. |
| Target Organ Effects | This material (or a component) has been shown to lower activity of certain immune system cells in experimental animals. The significance of this effect with respect to human health is uncertain. |
| Developmental Information | There are no data available for assessing risk to the fetus from maternal exposure to this material. |
| Primary Route(s) of Entry |
Inhalation, Skin contact, Eye contact. |
| Eyes | If material gets into the eyes, immediately flush eyes gently with water for at least 15 minutes while holding eyelids apart. If symptoms develop as a result of vapor xposure, immediately move individual away from exposure and into fresh air before flushing as recommended above. Seek immediate medical attention. |
| Skin | Immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Seek immediate medical attention. Wash clothing before reuse and discard contaminated shoes. |
| Swallowing | Seek immediate medical attention. Do not induce vomiting. Vomiting will cause further damage to the mouth and throat. If individual is conscious and alert, immediately rinse mouth with water and give milk or water to drink. If possible, do not leave individual unattended. |
| Inhalation | If symptoms develop, immediately move individual away from exposure and into fresh air. Seek immediate medical attention; keep person warm and quiet. If person is not breathing, begin artificial respiration. If breathing is difficult, administer oxygen. |
| Note to Physicians | Preexisting disorders of the following organs (or organ systems) may be aggravated by exposure to this material: skin, lung (for example, asthma-like conditions), immune system. |
| Flash Point | Not applicable |
| Explosive Limit | Not applicable |
| Autoignition Temperature | No data |
| Hazardous Products of Combustion | NA |
| Fire and Explosion Hazards | No special fire hazards are known to be associated with this product. |
| Extinguishing Media | Use an extinguishing media appropriate for surrounding fire.. |
| Fire Fighting Instructions | Water may be used to keep fire-exposed containers cool until fire is out. Wear a self-contained breathing apparatus with a full facepiece operated in the positive pressure demand mode with appropriate turn-out gear and chemical resistant personal protective equipment. Refer to the personal protective equipment section of this MSDS. |
| Small Spill | Dilute with water and absorb onto a noncombustible absorbent material. |
| Large Spill | Prevent run-off to sewers, streams or other bodies of water. If run-off occurs, notify proper authorities as required, that a spill has occurred. Collect and add slowly to large volume of water. Persons not wearing protective equipment should be excluded from area of spill until clean-up is completed. Stop spill at source. Dike to prevent spreading. Pump to salvage tank. |
| Handling | Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. Emergency eyewash fountains and safety showers should be available in the immediate vicinity of potential exposure |
| Eye Protection | Chemical splash goggles and face shield (8" min.) in compliance with OSHA egulations are advised; however, OSHA regulations also permit other type safety glasses. (Consult your industrial hygienist.) |
| Skin Protection | Wear impervious gloves (consult your safety equipment supplier). To prevent skin contact, wear impervious clothing and boots.. |
| Respiratory Protections | If overexposure has been determined or documented, a NIOSH/MSHA jointly approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirators under specified conditions. (See your safety equipment supplier.) Engineering or administrative controls should be implemented to reduce exposure. |
| Engineering Controls | Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below level of overexposure (from known, suspected or apparent adverse effects). |
| Exposure Guidelines | Component |
| Boiling Point | (for component) 212.0 F (100.0 C) | |
| Vapor Pressure | (for component) 17.500 mmHg | |
| Specific Vapor Density | No data | |
| Specific Gravity | 1.220 - 1.250 @ 68.00 F | |
| Liquid Density |
10.400 lbs/gal @ 68.00 F 1.250 kg/l @ 20.00 C |
|
| Percent Volatiles | 87.5% | |
| Evaporation Rate | SLOWER THAN ETHYL ETHER | |
| Appearance | No data | |
| State | LIQUID | |
| Physical Form | HOMOGENEOUS SOLUTION | |
| Color | CLEAR TO YELLOW LIQUID | |
| Odor | CHLORINATED | |
| pH | 11.5-12.50 | |
| Solubility in Water | SOLUBLE |
| Hazardous Polymerization | Product will not undergo hazardous polymerization. | |
|
- This article is considered stable under normal conditions - Avoid overheating, Keep away from frost - Incompatible with acid - See Section 5 |
|
Toxicological information |
No experimental data available. |
|
Inhalation |
Can cause damage to the respiratory system. |
|
Contact with skin |
Causes burns (R35). |
|
Contact with eyes |
Causes burns (R35). |
|
Ingestion |
The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system. |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
"In general, this cleaning agent main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers. |
|
Mobility |
Completely soluble in water |
|
Persistence and Biodegradability |
Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. |
| Waste Management Information |
|
| DOT Information | 49 CFR 172.101 | |
| DOT Description: | Mixture HYPOCHLORITE SOLUTIONS,8,UN1791,III | |
| Container/Mode: | 25 LTRS | |
| NOS Component: | Not applicable | |
| RQ (Reportable Quantity) | - 49 CFR 172.101 | |
| Product Quantity (lbs) | Component |
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No
Reactivity: No (Mixture / Liquid)
Australian Hazchem Code: None allocated.
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR
The information accumulated herein is believed to be accurate but is not warranted to be whether originating with the company or not. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.