Antifoam Defoamer AF20

Part No: RXSOL-81-2066-200

Highly effective liquid antifoam formulated for controlling foaming and priming in produced water processing in oil gas, waste water treatment, etc

Category
Drilling Fluids & Mud Oil Field chemicals

RXSOL Antifoam Defoamer AF20 is a concentrated, silicone-free antifoaming agent formulated using a synergistic combination of proprietory alcohols.

The formulation is designed to provide both rapid foam knockdown and sustained foam suppression. Antifoam Defoamer AF20 provides rapid destabilization of foam lamellae, while also contributing to persistent foam control and improved antifoam activity.

RXSOL Antifoam has demonstrated rapid foam-collapse performance in laboratory antifoam testing, including foam collapse within minutes and resistance to re-foaming under agitation/sparging conditions.

Application
Water & Wastewater Treatment
  • Effluent treatment plants
  • Sewage treatment systems
  • Industrial wastewater
  • Aeration tanks
  • Biological treatment
  • Sludge processing
  • Neutralization systems
Chemical Processing
  • Chemical blending
  • Reaction vessels
  • Mixing tanks
  • Detergent manufacture
  • Surfactant processing
  • Alkali cleaning solutions
  • Acid/alkali treatment systems
Industrial Cleaning
  • CIP systems
  • Tank cleaning
  • Equipment washing
  • Industrial degreasing
  • High-pressure cleaning
  • Detergent solutions
Marine & Oilfield
  • Tank-cleaning formulations
  • Oilfield chemical systems
  • Produced-water treatment
  • Drilling-fluid-related applications
  • Slop and oily-water treatment
  • Marine cleaning chemicals
Other Applications
  • Paper and pulp processing
  • Textile processing
  • Adhesives
  • Water-based formulations
  • Process auxiliaries
  • General industrial chemical processing
Dose

The required dosage depends strongly on the type and concentration of foaming agents, process temperature, agitation and contamination level.

Initial recommended dosage

10-100 ppm
for routine foam prevention.

Moderate foam

50-250 ppm

Severe / persistent foam

100-500 ppm

Shock treatment

250-1,000 ppm

For exceptionally severe foam conditions, higher concentrations may be required during initial treatment, followed by a lower maintenance dose.

Recommended practice: Start at the lowest effective dosage and increase progressively.

Technical specifications
Property Typical Value
Appearance Clear to slightly hazy liquid
Colour Colourless to pale yellow
Odour Characteristic fatty/alcohol odour
Specific Gravity @ 25°C 0.82-0.85
pH Not applicable / practically neutral
Viscosity @ 25°C Typically 10-20 cP
Flash Point Typically >50°C
Water Solubility Low; dispersible depending on system
Silicone Content Nil
Ionic Character Non-ionic
Active Matter ~100%
Packing sizes
Newly developed antifoam for oil and gas plants.
Supply location

Antifoam Defoamer Elite M8 manufacturer, exporter and supplier in India Mumbai, Kolkata, Chennai, Vizag, Gandhidham, Surat, UAE Middle East Dubai, Sharjah, Ajman, ABudhabi, Iraq, Kuwait, Oman Muscat Barka, Canada

Useful area
RXSOL Antifoam AF 20 may be advantageous where silicone-based products are undesirable.
 
Benefits include:
  • Silicone-free formulation
  • No silicone carryover
  • Suitable for systems where silicone contamination is undesirable
  • Organic alcohol-based chemistry
  • Rapid foam knockdown
  • Good compatibility with many aqueous chemical systems
  • Easy incorporation into process formulations
  • Suitable for continuous or intermittent dosing
 
Silicone-free defoamers are commercially used where silicone contamination or surface defects can be problematic in certain applications.
If you are looking for Silicon based Antifoam, check this product: RXSOL Antifoam Defoamer RXSOL-16-2066-210
Industrial area

What causes foam in aqueous systems like desalination plants?

Foam formation in seawater is typically caused by naturally occurring surfactants generated from:
  • Algae and plankton
  • Organic decomposition products
  • Hydrocarbon contamination
  • Biological activity
  • Turbulent mixing and aeration

Quick foam knockdown plus extended foam prevention properties in RXSOL Antifoam AF10

Parameter Performance
Foam Knockdown Speed Excellent
Foam Suppression Duration Excellent
Seawater Compatibility Excellent
Non-Silicone Performance Excellent
Residue Formation Very Low
Membrane Compatibility Good
Continuous Dosing Suitability Excellent
 
How to effective knockdown foaming in waste water systems, produced water systems in oil and gas:
A. Direct Addition
 
Add the required quantity directly into the process tank.
 
Recommended for:
  • Batch processes
  • Cleaning tanks
  • Wastewater tanks
  • Reaction vessels
  • Mixing vessels
 
Allow sufficient circulation/agitation for uniform distribution.
 
B. Metering Pump
 
For continuous foam control, RXSOL Organic Antifoam can be injected using a metering pump.
 
Typical starting point:
 
10-100 ppm continuously
 
The dosage should be adjusted according to foam generation.
 
C. Shock Dosing
 
For an already established foam layer:
  • Stop or reduce the foam-generating operation if possible.
  • Apply a small quantity of antifoam directly onto the foam.
  • Allow approximately 1–5 minutes for foam collapse.
  • Restart circulation/aeration.
  • Establish a lower continuous maintenance dose if required.
Remarks / Precaution

Mode of Action of FOAM KNOCKDOWN

Foam Film Destabilization

The hydrophobic alcohol components migrate toward the air-liquid interface and interfere with the surfactant film surrounding the foam bubble.

Reduction of Foam Film Stability

The antifoam disturbs the elastic surfactant layer, promoting thinning and rupture of the bubble wall.

Rapid Bubble Collapse

Antifoam AF20 provides rapid foam-breaking activity. Published testing has demonstrated rapid collapse of foam following addition of Antifoam AF20 .

Persistent Foam Suppression

Antifoam AF 20 with its longer hydrocarbon chain, contributes to a more persistent hydrophobic phase that can remain active during continued agitation.

Re-Foaming Control

 

The combination is intended to reduce the tendency of foam to regenerate after agitation, pumping, aeration or circulation.

Note

Key Features of RXSOL Oil and Gas ANTIFOAM

  • Silicone-free foam control
  • Rapid foam knockdown
  • Long-lasting antifoaming action
  • Effective under agitation and aeration

 

Safety Data (MSDS)

Porduct Name               Antifoam Defoamer AF20
Part Number   RXSOL-81-2066-200

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email mail@rxmarine.com
Website www.rxmraine.com

Proprietory blend of foam knockdown modified polyols.
 
Signal Word  Waring
Hazard Statements H315 Causes skin irritation. H319 Causes serious eye irritation. H332 Harmful if inhaled. H335 May cause respiratory irritation.
Precautionary statements   P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P302 + P352 IF ON SKIN: Wash with plenty of water. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. 
Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008.
Supplemental Hazard      Statements None
Other hazards  This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

General advice Show this material safety data sheet to the doctor in attendance. 
If inhaled fresh air.
Eye Contact  After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
Swallowed After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Skin Contact   In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Inhalation Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. 
Ingestion Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms and effects, both acute and delaye The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed  No data available

Flammability                                                  May be combustible at high temperature.
Suitable extinguishing media  Carbon dioxide (CO2) Foam Dry powder 
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given. 
Special hazards arising from the substance or mixture  Carbon oxides Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. 
Further information Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Hazardous combustion
products		 Fire may cause the evolution of Sulphur oxides, nitrogen oxides.
Advice for firefighters Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Protective Equipment Use personal protective equipment.
Specific Hazards Arising from the Chemical Has a fire-promoting effect due to the release of oxygen.
Ambient fire may liberate hazardous vapours.

Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe eme
Spillage Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal.
Personal Protection Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8.
Enviromental Precaution Do not let product enter drains.
Methods and materials for
containment and cleaning		 Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area.
Reference to other sections    For disposal see section 13.

Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge.
Incompatible materials  Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. 
Hygiene measures Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2
Advice on safe handling Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Conditions for safe storage, including any incompatibilities  Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Moisture sensitive.
Storage conditions Tightly closed. Recommended storage temperature see product label.
Storage class Storage class (TRGS 510): 10: Combustible liquids 
Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated 
Advice on general occupational hygiene Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.

Exposure controls  No specific additional engineering controls are required. Provide good natural or artificial ventilation. 
Engineering Control Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Body Protection protective clothing 
Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,4 mm Break through time: 480 min Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M) This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 30 min Material tested:KCL 741 Dermatril® L
Respiratory protection
Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Other Protection  Measure Handle in accordance with good industrial hygiene and safety practice.
Control of    environmental exposure Do not let product enter drains. 

Physical state Clear, Liquid
Colour Colorless
Odour No data available
Odor Threshold Not Applicable
pH No data available
Melting Point -89 °C - ISO 3016
Boiling Point 186 °C at 1.013 hPa - OECD Test Guideline 103
Flash Point 75 °C - closed cup
Evaporation Rate Not Applicable
Flammability (solid, gas) No data available
Explosive limits No Data Available
Upper/lower flammability or explosive limits Upper explosion limit: 9,7 %(V) Lower explosion limit: 0,88 %(V)
Autoignition temperature No data available
Decomposition temperature  No data available
Vapour pressure 0,93 hPa at 20 °C - OECD Test Guideline 104                                                   
Viscosity No data available      
Density 0,833 g/cm3 at 20 °C - DIN 51757
Relative Density 4,5 - (Air = 1.0)
Specific Gravity No data available 
Partition coefficient log Pow: 2,9 at 25 °C -
Explosive properties No data available 
Solubility Slightly soluble in water
Ignition temperature No information available.
Particle characteristics No data available 

Reactivity                        Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
Chemical stability The product is chemically stable under standard ambient conditions (room temperature) . 
Possibility of hazardous reactions No data available
Conditions to avoid Strong heating.                                                                                    
Incompatible materials
Strong acids, Strong oxidizing agents
Hazardous decomposition products In the event of fire: see section 5

Acute toxicity  LD50 Oral - Rat - male - 2.047 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Rat - male and female - 4 h - 0,89 - 5,3 mg/l - vapor (OECD Test Guideline 403) Inhalation: Irritating to respiratory system. LD50 Dermal - Rat - > 3.000 mg/kg Remarks: (RTECS)                     
Skin corrosion/irritation Skin - Rabbit Result: Skin irritation - 24 h (OECD Test Guideline 404)
Serious eye      damage/irritation Eyes - Rabbit Result: Causes serious eye irritation. (OECD Test Guideline 405)
Respiratory or skin    sensitization  No data available
Carcinogenicity No data available
Germ cell        mutagenicity  Test Type: Ames test Test system: Escherichia coli/Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative Test Type: Mutagenicity (mammal cell test): chromosome aberration. Test system: Chinese hamster ovary cells Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 473 Result: negative Test Type: In vitro mammalian cell gene mutation test Test system: mouse lymphoma cells Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 476 Result: negative
Reproductive toxicity  No data available
Specific target organ toxicity - single      exposure
May cause respiratory irritation.
Additional Information RTECS: UF9625000 Lung irritation, Cyanosis, Central nervous system depression To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

Persistence and degradability No data available
Toxicity to fish  flow-through test LC50 - Leuciscus idus (Golden orfe) - 17,1 mg/l - 96 h (OECD Test Guideline 203) 
Toxicity to daphnia and other aquatic invertebrates Static test EC50 - Daphnia magna (Water flea) - 39 mg/l - 48 h (Regulation (EC) No. 440/2008, Annex, C.2)
Toxicity Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1.520 mg/l - 96 h
Toxicity to bacteria  EC10 - Pseudomonas putida - 540 mg/l - 18 h (DIN 38412) Remarks: (IUCLID) 
Toxicity to algae Static test ErC50 - Desmodesmus subspicatus (green algae) - 16,6 mg/l - 72 h (Regulation (EC) No. 440/2008, Annex, C.3)
Products Biodegradation The methods for determining the biological degradability are not applicable to inorganic substances.
Mobility in soil No data available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Endocrine disrupting       properties No data available
Other adverse effects No data available .

Product See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.

UN number ADR/RID:                                       IMDG:                                        IATA:3334
UN proper shipping name  ADR/RID: Not dangerous goods    IMDG: Not dangerous goods    IATA:Not dangerous goods 
Transport hazard class(es)      ADR/RID:                                         IMDG:                                       IATA:9
Packaging group ADR/RID:                                         IMDG:                                       IATA:III
Environmental hazards ADR/RID: No                                    IMDG: No                                 IATA: No
Special precautions for user No data available
Further information Not classified as dangerous in the meaning of transport regulations.

Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Other regulations Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work.
Chemical Safety Assessment For this product a chemical safety assessment was not carried out

Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.