Part No: RXSOL-25-1002-005
Powerful degreaser for Industries, engine rooms and fuel cargo tanks. Also breaks the oil-in-water emulsion and destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
RXSOL-10-1002-025 : is a powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy . RXSOL-10-1002-025 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
RXSOL-10-1002-025 is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering. It is highly recommended for heavy duty degreasing action .
Typical dose rate: 100 - 500 ppm (0.1 - 0.5 litre/m3 of water)
In a multistage bilge water cleaning system, RXSOL-10-1002-025 is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation It is highly recommended for heavy duty degreasing action , Depending on contamination 5-25% with fresh water.
Bilge Clean manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Bilge Clean at a competitive price from us. We have ready stock of Bilge Clean in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
RXSOL-10-1002-025 : is a powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy .RXSOL-10-1002-025 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
Avoid direct contact with hand and eye. Always use MSDS before using of this product.
Heavy Duty Bilge Cleaner, Power Pine Bilge Cleaner, Bilge Care, Marine Bilge Cleaners
Safety Data (MSDS)
| Product Code | RXSOL-25-1002-005 |
| Product Name | Bilge Clean |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Oxidation blowing and chemical reaction of Fatty alcohol derivative, non-ionic surfactants,phosphates , EDTA, And remaining which is
not in the list of hazardous materials .
|
Environmental Hazards |
None ( > 90% INGREDIENTS are bio degradable.) |
|
Human Health Hazards |
Moderates |
|
R 36/38: Irritating to eyes and skin. |
|
|
Inhalation |
supply or remove to fresh air , Not relevant. |
|
Skin Contact |
Rinse with running water and soap. Remove contaminated clothes. |
|
Eye Contact |
Flush with running water for at least 15 minutes Immediately . |
|
Ingestion |
seek medical attention , try to drink more fresh water. |
|
Non combustible product |
|
|
Suitable |
N.A. can use all extinguishing media like foam dry Co2 , water-spray. |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
|
Precaution for fire-fighters |
Wear protective equipment. |
|
Enviromental Precaution |
Direct flow into drainage system, surface or ground water is prohibited. |
|
Cleaning Method |
Flush Spill Area with Water and remove with liquid-absorbing material like foam sand,sawdust etc.. |
|
Condition to Avoid |
Non flammable but avoid direct heating |
|
Materials to Avoid |
Do not subject to Acidic / Oxidizing Agents |
|
Handling |
Keep Container Tightly Closed |
|
NOTE |
Eyewash facilities require at workplace |
|
The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerag system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com |
|
|
Personal protection |
|
|
Respiratory System Protection |
Approved respirator must be worn when spraying. |
|
Eye Protection |
wear eye protection (on possibility of contact ). |
|
Hand protection |
Wear PVC chemical resistance protective gloves. |
|
Product Properties |
|
|
Appearance |
Clear liquid |
|
Density |
In g/cm3 at 20°C: 1.1 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH Flash point |
Alkaline ( 12.5 ) . Not Applicable |
|
Solubility |
100% soluble in water |
|
Hazardous Decomposition Products |
Do not occur if stored and used as directed. In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas. |
|
Comment |
Not applicable , Emulsifies in water . Product is giving irritation on skin. |
95 % added surfactants are biodegradable as per by international regulation . But strictly This material must be disposed with
local national regulations.
As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.
Not a hazardous material according to RID/ADR, GGVS, GGVE, ADNR, IMDG, ICAO- TI/IATA-DGR
Classification and labelling according to Chemicals Hazard Information and Packaging Regulations (CHIP).
Symbols of danger :- Xi Irritant
|
R |
phrases |
|
R 36/38 |
Irritating to eyes and skin |
|
S |
phrases |
|
S26 |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
|
S28 |
After contact with skin, wash immediately with plenty of water. |
|
S37/39 |
Wear suitable gloves and eye/face protection. |
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.