Part No: RXSOL-44-1027-005
Metal RUST Prevantiveprotective coating is thin, transparent, clear and slightly oily.
Corrosion Inhibitor for metal RUST Preventive is a general purpose solvent based corrosion preventive. It is an organic rust inhibitor, which has water displacing properties and is a fingerprint neutralizer. The protective coating is thin, transparent, clear and slightly oily.
Application or immersion type dewatering and protective fluid.
Corrosion Inhibitor for metal RUST Prevantive protects all ferrous and non-ferrous metals during processing, indoor storage and wrapped shipment (up to 12 months).
Corrosion Inhibitor for metal RUST Preventive is a “natural” for the bearing industry. Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment. It can also be used for automotive parts and other precision and semi-precision parts.
RECOMMENDED STARTING DILUTIONS
Corrosion Inhibitor for metal RUST Preventive is to be used as is. Add no other materials to dilute the concentration unless approved by RX Marine International technical team.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
| Physical State | : | Liquid |
| Solubility in Water | : | Insoluble |
| Boiling Point | : | >190°F |
| Flash Point, COC | : | 190°F |
| Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
| Appearance and Odor | : | Opaque/Chemical |
| Specific Gravity | : | 0.82 |
| VOC Content (ASTM D2369) | : | 58% |
| pH Concentrate | : | NA |
| Total Sulfur, wt% | : |
0.00 |
FEATURES & BENEFITS
VERSATILE:
Corrosion Inhibitor for metal RUST Preventive rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.
Corrosion Inhibitor for metal RUST Prevantive is applied with in-process spray or dip tank application where fluid run-off is collected for reuse, water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom.
Corrosion Inhibitor for metal RUST Prevantive can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.
Safety Data (MSDS)
| Product Name | Corrosion Inhibitor for metal RUST Preventive |
| Part Number | RXSOL-16-1027-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Kandla, Mumbai, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat, Canada
| Name of Substance | Cas Number | EC Number | Concentation | R/H Phrases |
| Phosphoric (Orthophosphoric) acid | 7664-38-2 | 231-633-2 | 10 - 30% | R34 - H314, |
| Zinc Chloride | 7645-85-7 | 231-590-2 | 10 - 30% | R22,R34,H302 |
| 2-Phosphonobutane-1,2,4-tricarboxylic Acid | 37971-36-1 | 253-733-5 | 10 - 30% | R36 - H319 |
| Signal Word | Danger |
| Hazard Pharses |
Harmful if swallowed (H302). Causes severe skin burns and eye damage (H314). May cause respiratory irritation (H335). Toxic to aquatic life with long lasting effects (H411). |
| Precautionary Pharses- prevention |
P210 Keep away from heat/sparks/open flames/hot surfaces - No smoking. If medical advice is needed, have product container or label at hand (P101). Wear protective gloves/protective clothing/eye protection/face protection (P280). IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician(P301+P310). Rinse mouth (P330). Do NOT induce vomiting (P331). IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower (P303+P361+P353). IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing (P305+P351+P338). Immediately call a POISON CENTER or doctor/physician (P310). Dispose of contents/container to an authorised waste collection point (P501) |
| Other Hazard |
- Not applicable - Not a PBT according to REACH Annex XIII - Odour: Characteristic odour - Appearance: colourless to yellow, miscible with water |
| If Inhalded: | If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing (P304+P341). Remove victim to fresh air and keep at rest in a position comfortable for breathing (P304+P340). When in doubt or symptoms persist, seek medical attention |
| If Swallowed: | rinse mouth. Do NOT induce vomiting (P301+P330+P331).Give plenty of water to drink Never make an unconscious person vomit or drink fluids When in doubt or symptoms persist, seek medical attention |
| If In Eye | Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing (P305+P351+P338).Obtain immediate medical attention. |
| Most important symptoms and effects, both acute and delayed |
Can cause damage to the eyes. Possible blistering of the skin of affected areas. The ingestion of significant quantities may cause damage to mucous membranes. The ingestion of significant quantities may cause damage to stomach lining. |
| Extinguishing media | Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions |
|
Special hazards arising from the substance or mixture |
Smoke from fires is toxic. Take precautions to protect personnel from exposure. Smoke from fires is corrosive. Take precautions to protect personnel from exposure |
| Advice for firefighters |
Keep container(s) exposed to fire cool, by spraying with water In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion (P371+P380+P375). Wear chemical protection suit and positive-pressure breathing apparatus |
| Personal precautions, protective equipment and emergency procedures | In case of insufficient ventilation, wear suitable positive pressure respiratory protection equipment.Wear chemical protection suit.Wear neoprene or nitrile gloves |
| Environmental Precautions | Avoid release to the environment (P273). Do not flush spilt material into any public water system |
| Methods and material for containment and cleaning up | Eliminate all ignition sources if safe to do so (P381). Absorb spillage in earth or sand.Place in sealable container.Seal containers and label them.Remove contaminated material to safe location for subsequent disposal. Ventilate the area and wash spill site after material pick-up is complete |
| Reference to other sections | See Section 13 |
| Precautions for safe handling | Avoid breathing dust/fume/gas/mist/vapours/spray (P261).Avoid contact with alkalis (strong bases).Avoid contact with metals.Eyewash bottles should be available. See Section 8 |
| Conditions for safe storage, including any incompatibilities | Keep container tightly closed (P233).Keep cool. Protect from sunlight (P235+P410).Avoid contact with alkalis (strong bases) |
| Specific end use(s) | Restricted to professional users |
|
Control parameters |
Phosphoric acid ... %, Orthophosphoric acid ... % WEL (long term) 1 mg/m3 WEL (short term) 2 mg/m3 Zinc Chloride....... WEL (long term) 1 mg/m3 WEL (short term) 2 mg/m3 |
| Exposure controls | Ensure adequate ventilation |
| Occupational exposure controls | TWA: 2 STEL: 4 (ppm) from ACGIH (TLV) [United States] TWA: 2 STEL: 4 from OSHA (PEL) [United States] Consult local authorities for acceptable exposure limits. |
| Other Protection Measure | In case of inadequate ventilation wear respiratory protection (P285). Wear suitable respiratory protection. Gas cartridge (acid gases). Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended) Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. |
Gloves Suit
| Odour | Characteristic |
| Appearance | Characteristic, miscible with water |
| pH | 1 - 2 |
| Boiling point | 100 °C |
| Density | >1 at 20 deg C |
| Other information | No information available |
| Recativity | This article is considered stable under normal conditions |
| Possibility of hazardous reactions | No information available |
| Incompatible materials | Incompatible with alkalis (strong bases). Avoid contact with metals. |
| Conditions to avoid | Keep away from frost |
| Hazardous Decomposition Products | Oxides of phosphorous and phosphorous acid mist |
| Information on toxicological effects |
LD50 (oral,rat) (Phosphoric acid) 2600 mg/kg LD50 (oral,rat) (Zink Chloride) 1100-1260 mg/kg LD50 (oral,rat) (2-Phosphonobutane-1,2,4-tricarboxylic Acid) >6500 mg/kg |
| Contact with eyes | Can cause damage to the eyes |
| Contact with Skin | May cause blistering of the skin |
| Ingestion | Not regarded as a potential route of exposure. Can cause damage to the stomach lining.In cases of severe exposure, gastro-intestinal disturbances may develop |
| Shall not be classified as presenting an aspiration hazard. | |
| Inhalation | In cases of severe exposure, breathing difficulty may develop |
| Toxicity |
LC50 (fish) (2-Phosphonobutane-1,2,4-tricarboxylic Acid) 5300 mg/l (96 hr). LC50 (fish) (Phosphoric acid) 3-3,25 mg/l (96 hr). LC50 (fish) (Zink Chloride) 1,169 mg/l (96 hr). This product contain an acidic component which may cause a low pH-value. Effect depends on waterquality and the organisms tolerance due to pH-value.This product contains components which are classified in the EU as dangerous for the environment. |
| Process of degradability | The components in this product are readily biodegradable. |
| Bioaccumulative potential | Not applicable |
| Mobility in soil | Miscible with water |
| Results of PBT and vPvB assessment | Not a PBT according to REACH Annex XIII |
| Other adverse effects | No information available |
|
Waste treatment methods |
Disposal should be in accordance with local, state or national legislation. Dispose of contents/container to an authorised waste collection point (P501) |
| Classification | EU Waste class: 06 01 04 |
| UN Number | UN3264 |
| Proper shipping name |
Corrosive liquid, acidic, inorganic, n.o.s. (Zink Chloride, phosphoric acid mixture) |
| Hazard Class | 8 |
| Packing Group | III |
| Environmental hazards | This product contains components which are classified in the EU as dangerous for the environment |
| Special precautions for user | No special precautions are required for this product |
| Transport in bulk according to Annex II of MARPOL 73/78 and the IBC code | Not Applicable |
Road/Rail (ADR/RID)
| UN Number | UN3264 |
| Proper shipping name |
Corrosive liquid, acidic, inorganic, n.o.s. (Zink Chloride, phosphoric acid mixture) |
| ADR Hazard Class | 8 |
| ADR subrisk | NA |
| ADR Packing Group | III |
| ADR Flashpoint | NA |
Sea (IMDG)
| IMDGUN Number | UN3264 |
| Proper shipping name | Proper Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s. (Zink Chloride, phosphoric acid mixture) |
| IMDG Hazard Class | 8 |
| IMDG subrisk: | NA |
| IMDG Pack Group | III |
| IMDG EmS | F-A, S-B |
| IMDG Flashpoint | NA |
Air (ICAO/IATA)
| ICAOUN Number | UN3264 |
| Proper shipping name | Proper Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s. (Zink Chloride, phosphoric acid mixture) |
| ICAO Hazard Class | 8 |
| ICAO subrisk: | NA |
| ICAO Pack Group | III |
| ICAO Flashpoint | NA |
DOT / CFR (US Department of Transportation)
| Identification Number | UN3264 |
| DOTProper shipping name | Proper Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s. (Zink Chloride, phosphoric acid mixture) |
| Product RQ (lbs) | NA |
| Hazardous Material | Zink Chloride, phosphoric acid |
| Hazard Class | 8 |
| DOT subrisk | NA |
|
Safety, health and nvironmental regulations/ legislation specific for the substance or mixture |
This Safety Data Sheet has been prepared in accordance with article 31 and annex II in REACH and Directive 453/2010/EU. Counsil Directive 1999/45/EEC Classification, packing and labelling of dangerous preparations. Refer to The Dangerous Substances Directive (67/548/EEC). Regulations 1272/2008/EEC. Classification, labeling and packing of dangerous .substances and preparations |
| Chemical Safety Assessment | Slightly harmful to aquatic organisms. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |