RXSOL Paraffin Wax Dispersant PD 100

Part No: RXSOL-81-3075-200

RXSOL Paraffin Wax Dispersant is a solvent based products which is popular due to high wax solvency power

Category
Drilling Fluids & Mud Oil Field chemicals

RXSOL Paraffin Wax Dispersant Rx is a solvent based blend of anionic and non-ionic surfactants designed to disperse sludge deposits found within crude oil storage vessels, pipelines and well tubulars. RXSOL Paraffin Wax Dispersant Rx when mixed and circulated with hydrocarbon sludge, will aid in converting the sludge back into a marketable crude oil. Typical sludge deposits are composed of a mixture of waxes, asphaltenes, water, light hydrocarbons and solids. RXSOL Paraffin Wax Dispersant Rx acts to disrupt paraffin micelles that constitute the major source of viscosity for most typical hydrocarbon sludges.

Paraffin Wax Dispersant is a high-performance oil-soluble chemical treatment formulated for the control, dispersion and removal of paraffin/wax deposits encountered in crude-oil production, transportation, storage and processing systems.

The product is based on a synergistic combination of C10 aromatic hydrocarbon solvents, including a controlled naphthalene-containing aromatic fraction. The formulation provides strong solvency together with surface-active dispersing action to penetrate and loosen existing wax deposits and reduce the tendency of liberated paraffin crystals to agglomerate and redeposit on equipment surfaces.

 

Paraffin Wax Dispersant is particularly suitable for oilfield systems where paraffin precipitation can restrict flow, increase pressure drop, reduce production efficiency and cause fouling of pipelines, tubing, pumps, tanks, separators and associated hydrocarbon-handling equipment.

Application

Specifically designed to prevent wax and paraffin deposition, RXSOL Paraffin Wax Dispersant Rx keeps them dispersed preventing downstream plugging of flowlines and formations. This unique and innovative surfactant blend also enhances penetration of existing deposits aiding in their removal.

Application of Paraffin Dispersant:

  • Crude-oil production wells
  • Production tubing
  • Flowlines
  • Gathering lines
  • Crude-oil pipelines
  • Transfer lines
  • Storage tanks
  • Crude-oil tank bottoms
  • Separators
  • Pumps and valves
  • Wellhead equipment
  • Production manifolds
  • Heat exchangers handling waxy hydrocarbons
  • Hydrocarbon processing equipment
  • Tank and pipeline cleaning operations
  • Offshore and onshore production facilities

An excellent oil soluble paraffin wax, sludge, heavy fuel oil HFO dispersant. Effectively absorbs the complete sludge and clears pipelines, tanks, etc.

Dose

RXSOL Paraffin Wax Dispersant Rx is typically applied at concentrations of 250 –1000 ppm. It can be added directly to the sludge, but it is more typically used in combination with a diluent such as a light naphtha, crude oil or aromaticsolvent. The resulting mixture is circulated for several hours until all of the sludge has been dispersed. The circulation is then stopped and the solids and water allowed to settle. The clean crude can then be pumped out of the vessel.
RXSOL Paraffin Wax Dispersant Rx  can be combined with  Rxsol PPD depending on composition of the deposit to achieve maximum effectiveness.

The optimum dosage depends on the crude-oil composition, paraffin content, Wax Appearance Temperature, operating temperature, existing deposit thickness, flow velocity and treatment method.
 
Preventive / Continuous Treatment
 
A typical starting dosage is:
 
50-500 ppm
 
The product should preferably be injected upstream of the location where wax deposition normally begins and, where practical, while the crude oil temperature remains above or close to its Wax Appearance Temperature.
 
Moderate Wax Deposition
 
Typical treatment:
 
500-2,000 ppm
 
Treatment may be continuous or intermittent depending upon operating conditions.
 
Severe Wax Deposition / Batch Treatment
 
For heavily waxed systems, a concentrated treatment may be required.
 

Typical starting range:

1-10% product in a suitable hydrocarbon carrier
 
Higher concentrations or neat-product treatment may be considered after compatibility and field testing.
 
Soaking Treatment for cleaning Heavy Wax Deposits
  • For pipelines, equipment or isolated sections containing hardened paraffin deposits:
  • Remove free oil where operationally appropriate.
  • Introduce Paraffin Wax Dispersant neat or diluted in a compatible hydrocarbon solvent.
  • Ensure maximum contact with the wax deposit.
  • Allow sufficient soaking time.
  • Circulate where possible to increase mass transfer.
  • Flush displaced wax and contaminated solution from the system.
 
Typical contact time may range from 2–12 hours, depending on deposit thickness, temperature and circulation conditions.
 
Injection Procedure
  • For continuous treatment, Paraffin Wax Dispersant may be injected using a chemical dosing pump.
  • The injection point should preferably be located:
  • Upstream of the wax deposition zone
  • At the wellhead
  • Downhole where technically suitable
  • Upstream of flowline restrictions
  • Before pipeline temperature falls substantially below WAT
  • Upstream of separators or transfer systems where wax deposition is observed
  • Uniform distribution of the chemical in the crude oil is important for maximum effectiveness.
 
Pipeline Cleaning
 
For existing paraffin deposits in pipelines:
  • Determine the approximate amount and location of wax accumulation.
  • Where practical, mechanically remove excessive bulk deposits before chemical treatment.
  • Introduce the product neat or diluted with a compatible hydrocarbon solvent.
  • Circulate the cleaning solution through the affected section.
  • Maintain adequate contact time.
  • Moderate heating, where equipment and operating procedures permit, can substantially improve wax dissolution.
  • Continue circulation until the required flow improvement or deposit removal is obtained.
  • Displace the spent cleaning solution and loosened wax into an appropriate recovery system.
  • Laboratory testing is recommended before large-scale treatment.
 
Tank Cleaning
 
For paraffin/wax accumulation in crude-oil tanks:
 
Paraffin Wax Dispersant can be applied to soften and disperse waxy hydrocarbon residues prior to mechanical removal or circulation cleaning.
 
The product may be:
  • Sprayed onto wax deposits
  • Added to a hydrocarbon circulation medium
  • Recirculated through the tank
  • Applied as part of a soak-and-circulate cleaning procedure

 

Warm hydrocarbon circulation may increase cleaning efficiency where safe and operationally permissible.
Technical specifications

Typical Physical Properties

Parameters Values
Appearance :Yellow/Brown Liquid
Specific Gravity : 0.8 at 15.5 °C
Flash Point : >60°C
pH : Not applicable
Solubility in Hydrocarbons : Soluble
Solubility in Water : Insoluble
Ionic : Character Anionic
Supply location

Crude oil Sludge Deposits Dispersant Wax Dispersant RXSOL manufacturer, exporter and supplier in Mumbai, Gandhidham, Visakhapatnam, Chennai, Kolkata, Ajman, Dubai, Sharjah, Abudhabi, Oman, SOHAR, Muscat, Canada, Nairobi Kenya Africa

Get premium quality of Paraffin Wax Dispersant in Kuwait, Qatar, Iraq, Dubai, UAE, Muscat OMAN, Kenya Africa, Canada

Useful area

Paraffin Dispersant manufacturer and supplier in Abu Dhabi, Ruwais, LIWA, UAE. Buy premium quality Paraffin Dispersant for cleaning waxy sludge from pipeline in Congo, Africa.

Remarks / Precaution

Why does WAX form inside crude pipelines and how to effectively remove such paraffin/heavy fuel oil matter?

Paraffin deposits generally form when the temperature of wax-containing crude oil falls below its Wax Appearance Temperature (WAT). Dissolved higher-molecular-weight paraffinic hydrocarbons begin to crystallize and may subsequently agglomerate and adhere to cooler metal surfaces.

Paraffin Wax Dispersant works through a combination of:

1. Solvent Penetration

The aromatic hydrocarbon solvent system penetrates wax deposits and assists in softening and dissolving hydrocarbon-soluble fractions.

2. Surface Wetting

The benzenesulfonic acid derivative improves wetting of wax-contaminated surfaces, allowing the solvent phase to penetrate deposits more efficiently.

3. Wax Dispersion

As deposits are loosened, the dispersing component helps separate wax particles and crystals and maintain them in the hydrocarbon phase.

4. Reduction of Redeposition

By maintaining loosened wax in a dispersed condition, the product helps reduce rapid reagglomeration and redeposition downstream.

Note

Features and Advantages
 

  • Permits the recovery of Crude oil from tank Bottom Sludges
  • Acts a pour point inhibitor for some waxy crudes.
  • Promotes solids settling and demulsification.
  • Contains no products detrimental to refinery operations.

Safety Data (MSDS)

Product Name : RXSOL Paraffin Wax Dispersant PD 100
Part Number : RXSOL-81-3075-200

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN, CANADA  and KENYA.

Phone +91 22 20871200 - 1400
Fax +91 22 2761 2100 :::AOH :0091 9821214367
Email 123@rxmarine.com
Website www.rxmarine.com

Name     of        Substance                                         Cas Number EC  No Wt. Percent Symbol
VM P naphtha 8032-32-4   45-48  
Xylene 1330-20-7 202-422-2 35-40  Xi
Thylbenzene 100-41-4 202-849-4 1.0-5.0  Xn
Terpene 68956-56-9   12-15  Xn
Benzenesulfonic acid, C10  16  Alkyl                                 68584-24-7   1.0 -5.0  Xn
1,2,4-Trimethyl benzene 95-63-6   0.5-1.0  
Proprietory Blend --- --- ---  

 

Signal Word                        Danger
Hazard Statements

Extremely flammable liquid and vapor.
Causes skin irritation.
Causes serious eye damage.
May cause an allergic skin reaction.
Suspected of damaging fertility or the unborn child.
Suspected of causing cancer.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May be fatal if swallowed and enters airways
Precautionary statements - prevention

Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Keep container tightly closed.
Use non-sparking tools.
Take precautionary measures against static discharge.
Ground and bond container and receiving equipment.
Use explosion-proof electrical and ventilating equipment.
Avoid breathing mist or vapours.
Wash hands after handling.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves and eye/face protection
Precautionary statements - response IF exposed or concerned: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. Immediately call a POISON CENTRE or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER or doctor/physician if you feel unwell.
In case of fire: Use water fog, dry chemical, CO2 or ‘alcohol’ foam to extinguish
Storage: Store locked up. Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.

Eye Contact Get medical attention immediately. Call a poison center or physician. Immediately flush the eye(s) continuously with lukewarm, gently flowing water for at least 20-60 minutes while holding the eyelid(s) open. Check for and remove any contact lenses. Chemical burns must be treated promptly by a physician
Skin Contact Get medical attention immediately. Call a poison center or physician. Wash affected area with soap and mild detergent for at least 20 - 60 minutes. Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Chemical burns must be treated promptly by a physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Inhalation:              Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway.
Ingestion: Call a poison center or physician. Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Chemical burns must be treated promptly by a physician. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway
Note to Physician Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Protection of first-aiders No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

Suitable extinguishing media Use dry chemical, CO₂, alcohol-resistant foam or water spray (fog). 
Unsuitable extinguishing media Do not use water jet
Protective  Equipment                       Wear suitable fire fightin suit.
Specific hazards arising
from the chemical		 Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion
Hazardous thermal
decomposition products		 Carbon dioxide,carbon monoxide,sulfur oxides
 
Special protective actions
for fire-fighters		 Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
Special protective
equipment for fire-fighters		 Fire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.

Personal precautions, protective equipment and emergency procedures

For non-emergency : personnelNo action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Do not breathe vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel".
Enviromental  Precaution  Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
Methods and materials for
containment and cleaning up

Small Spill :: Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large Spill  : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,water courses, basements or confined areas. Wash spillages into an effluent treatmentplant or proceed as follows. Contain and collect spillage with non-combustible,absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

Advice on safe handling Put on appropriate personal protective equipment (see Section 8). Avoid exposure - obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges. Empty containers retain product residue and can be hazardous. Do not reuse container.
Storage Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.
Conditions for safe storage including any incompatibilities Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use

 

Occupational exposure limits  

 

ExposureLimits:

 

ChemicalName

ACGIHTLV

 

TWA                  STEL

OSHAPEL

 

PEL                     STEL

VM&Pnaphtha

N/Av

N/Av

N/Av                               N/Av

Xylenes

100ppm

150ppm

100ppm(435                                          N/Avmg/m³)

Hydrocarbons,terpeneprocessingby-products

N/Av

N/Av

N/Av                               N/Av

Ethylbenzene

20ppm

N/Av

100ppm(435                                          N/Avmg/m³)

Benzenesulfonicacid,C10-16-alkylderivatives,

compoundswith2-Propanamine

N/Av

N/Av

N/Av                               N/Av

1,2,4-Trimethylbenzene

25ppm(mixedisomers)

N/Av

25ppm                             N/Av

(trimethylbenzeneisomers)(finalrulelimit)
Engineering Controls

Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Personal   Protection Eye protection : Wear chemical safety goggles. When transferring material wear face-shield in addition to chemical safety goggles. If inhalation hazards exist, a full-face respirator may be required instead.
Hand protection : Chemical-resistant glove
Skin protection : Wear long sleeves and chemical resistant apron to prevent repeated or prolonged skin
contact.
Respiratory protection : If a risk assessment indicates it is necessary, use a properly fitted, air purifying or supplied air respirator complying with an approved standard. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.

Physical State         Liquid
Colour Clear Brown or yellow liquid
Odour Characteristic aromatic hydrocarbon odour
Odor threshold Not Available
pH                                                         

Not Available
Boiling Point Not Available
Initial Boiling Point Not Available
Freezing Point/ Melting Point -35°C
Flash Point  Closed cup: 30°C
Burning Time Not Applicable
Burning Rate Not Applicable
Evaporation rate Not Applicble
Flammability (solid, gas) Highly flammable in the presence of the following materials or conditions: open flames, sparks and static discharge and heat.
Upper explosion limit No data available
Lower explosion limit No data available
Explosive properties No data available
Vapor pressure 22.1 kPa (165.5 mm Hg, 3.2 psig) @ 54.4°C, 130 F (Reid)
Vapor density No information available
Specific Gravity @ 25 Deg C  0.850 - 0.980
Water solubility Insoluble
Partition coefficient: octanol No data available
Autoignition temperature No data available
Thermal decomposition No data available
Viscosity, kinematic No data available
Explosive properties No data available
Oxidizing properties No data available
Dynamic viscosity No data available
VOC (%)  No data available
Pour point No information available

Recativity                                             No specific test data related to reactivity available for this product or its ingredients.
Stability Stable under normal  conditions and recommended use.
Possibility of hazardous reactions Under normal conditions of storage and use, hazardous reactions will not occur.
Incompatible materials Reactive or incompatible with the following materials: oxidizing materials, organic materials, acids and alkalis.
Hazardous Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Condition to Avoid Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition.
Polymerization Hazardous polymerization does not occur.

 

Acute toxicity

 

 

 

Chemical Name

 

LC50(4hr)

inh,rat

 

LD50

(Oral,rat)

(Rabbit,dermal)

VM&Pnaphtha

3400ppm(16mg/L)

>5000mg/kg

>2000mg/kg

Xylenes

6350ppm(27.6mg/L)(vapour)

3253mg/kg

12180mg/kg

Hydrocarbons,terpeneprocessingby-products

N/Av

N/Av

N/Av

Ethylbenzene

4000ppm(17.4mg/L)(vapour)

3500mg/kg

15380mg/kg

Benzenesulfonicacid,C10-16-alkylderivatives,compoundswith

2-Propanamine

N/Av

>2000mg/kg

N/Av

1,2,4-Trimethylbenzene

18mg/L(vapour)

5000mg/kg

>3160mg/kg
Irritation/Corrosion No applicable toxicity data
Sensitization                                

No applicable toxicity data
Mutagenicity Not expected to be mutagenic in humans.
Carcinogenicity

This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Classification: Carcinogenicity- Category 2 Suspected of causing cancer. Contains Ethylbenzene. Ethylbenzene is classifed as carcinogenic by IARC (Group 2B) and ACGIH (Category A3).
Reproductive toxicity This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Classification: Reproductive Toxicity - Category 2 Suspected of damaging fertility or the unborn child. This product contains Xylene. Xylene may cause fetotoxic effects (e.g. reduced fetal weight, delayed ossification, behavioral effects) at doses which are not maternally toxic, based on animal data.

Teratogenicity

 No applicable toxicity data
Specific target organ toxicity (single exposure) This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Classification: Specific Target Organ Toxicity, Single Exposure -Category 3 (respiratory) Specific Target Organ Toxicity, Single Exposure - Category 3 narcotic effects May cause respiratory irritation. May cause drowsiness or dizziness.
Aspiration hazard
Name Result
Xylene ASPIRATION HAZARD - Category 1
Information on the likely
routes of exposure		 Routes of entry anticipated: Dermal, Inhalation.
Potential acute health effects  
Eye contact : Causes serious eye damage.
Inhalation :  Harmful if inhaled. Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness.
Skin contact : Causes severe burns. Harmful in contact with skin.
Ingestion :

Can cause central nervous system (CNS) depression.
Potential chronic health effects  
General : May cause damage to organs through prolonged or repeated exposure.
Carcinogenicity : Suspected of causing cancer. Risk of cancer depends on duration and level of exposure.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

 

EcoToxicity                                

Not classified for hazards to the environment.However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Do not allow material to contaminate ground water system.

 

 

Ingredients

 

CASNo

Toxicity to Fish

LC50/96h

NOEC/21day

MFactor

VM & P naphtha

8032-32-4

11.4mg/L(Rainbow trout)

N/Av

None.

Xylenes

1330-20-7

8.2mg/L(Rainbow trout)

N/Av

None.

Hydrocarbons,terpene processin gby-products

68956-56-9

5.07mg/L(Zebrafish)

N/Av

None.

Ethylbenzene

100-41-4

4.2mg/L(Rainbow trout)

1.13mg/L(30days)(QSAR)

None.

Benzene sulfonicacid,C10-16-alkyl derivatives,

compounds with 2-Propanamine

68584-24-7

N/Av

N/Av

None.

1,2,4-Trimethylbenzene

95-63-6

7.72mg/L(Fathead minnow)

N/Av

None.

 

Ingredients

 

CASNo

Toxicity to Daphnia

EC50/48h

NOEC/21day

MFactor

VM & P naphtha

8032-32-4

4.5mg/L(Daphniamagna)

0.17mg/L(Daphniamagna)

None.

Xylenes

1330-20-7

3.2-9.56mg/L(Daphniamagna)

N/Av

None.

Hydrocarbons,terpene processing by-products

68956-56-9

2.1mg/L(Daphniamagna)

N/Av

None.

Ethylbenzene

100-41-4

1.81mg/L(Daphniamagna)

N/Av

None.

Benzenesulfonic acid,C10-16-alkyl derivatives,

compoundswith2-Propanamine

68584-24-7

N/Av

N/Av

None.

1,2,4-Trimethylbenzene

95-63-6

3.6mg/L(Daphniamagna)

N/Av

None.
Persistence and degradability

Not available.
Other adverse effects No known significant effects or critical hazards.
Mobility in Soil No data is available on the product itself.
Results of PBT and vPvB assessment

Not classified as PBT/vPvB by current EU criteria.

 

Remarks Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Waste Disposal Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Transport hazard class(es)              

Regulatory Information

 

UN Number

 

UN proper shipping name

Transport hazard class(es)

Packing Group

 

Label

TDG

 

 

TDG

Additionali nformation

UN1993

FLAMMABLE LIQUID,N.O.S.(V M& P Naphtha)

3

I

FLAMMABLE 

Please consult the TDG guidelines for further information.

49CFR/DOT

49CFR/DOT

Additional information

UN1993

FLAMMABLE LIQUID,N.O.S.(V M& P Naphtha)

 

3

I

 

FLAMMABLE 

May be shippedasa Limited Quantity according to packaging section173.150.

ICAO/IATA

 

 

ICAO/IATA

Additional information

UN1993

FLAMMABLE LIQUID,N.O.S.(V M& P Naphtha)

3

I

FLAMMABLE 

Refer to ICAO/IATA Packing Instruction

IMDG

 

 

IMDG

Additional information

UN1993

FLAMMABLE LIQUID,N.O.S.(V M& P Naphtha)

3

I

FLAMMABLE 

Consult the IMDG regulations for exceptions.
Additional information
Special precautions for user                      Keep away from heat, sparks and open flame. - No smoking.
TDG Classification Product classified as per the following sections of the Transportation of Dangerous
Goods Regulations: 2.18-2.19 (Class 3), 2.40-2.42 (Class 8).
IATA  The environmentally hazardous substance mark may appear if required by other transportation regulations.
Special precautions for user Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Environmental hazards
Environmental hazards This substance does not meet the criteria for an environmentally hazardous substance according to the IMDG Code. See ECOLOGICAL INFORMATION, Section 12..
Marine pollutant No

US Federal Regulations

 

 

Ingredients

 

 

CAS#

 

TSCA

Inventory

 

CERCLA

Reportable Quantity (RQ)(40

CFR117.302):

SARA TITLE III:
Sec.302,

Extremely Hazardous Substance,40

CFR355:

SARA TITLE III:
Sec.313,
40CFR

372,Specific
Toxic Chemical

 

Toxic Chemical

Deminimus Concentration

VM&Pnaphtha

8032-32-4

Yes

N/Ap

N/Av

No

N/Ap

Xylenes

1330-20-7

Yes

100lbs/45.4kg

None.

Yes

1%

Hydrocarbons,terpene

processingby-products

68956-56-9

Yes

N/Ap

N/Av

No

N/Ap

Ethylbenzene

100-41-4

Yes

1000lb/454kg

None.

Yes

0.1%

Benzenesulfonicacid,

C10-16-alkylderivatives,compoundswith

2-Propanamine

68584-24-7

Yes

N/Ap

N/Av

No

N/Ap

1,2,4-Trimethylbenzene

95-63-6

Yes

None.

None.

Yes

1%
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA) : This product contains substance(s) which are not listed on the Domestic Substances List (DSL) or the Non-Domestic
Substances List (NDSL).
NATIONAL REGULATIONS, CANADA : WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS) :
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR)
and the MSDS contains all the information required by the CPR.
WHMIS CLASSIFICATION :
B2 - Flammable Liquids, D2A - Materials Causing Other Toxic Effects - Very Toxic Material, D2B - Materials Causing
Other Toxic Effects - Toxic Material
California Prop. 65 WARNING: This product can expose you to benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. This product can expose you to chemicals including Sulfuric acid, ethylbenzene, cumene, which are known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm.

Other Information  

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.