Bulk carriers switch cargoes often: coal, iron ore, petcoke, fertiliser, grain. Each switch needs a hold that passes inspection, and dirty holds cost time and money. Two things make the job faster: a barrier coat before loading, and the right cleaner after discharge.
What a barrier coating does
A barrier coat is a thin, water-soluble film sprayed on the hold walls before a sticky or staining cargo is loaded. Cargo residue sticks to the film, not to the paint. After discharge, the film is washed off with water and most of the residue goes with it. This cuts washing time and protects the hold paint from coal and petcoke staining.
- Apply on clean, dry walls before loading.
- Use an airless sprayer for an even film.
- Wash off with sea water after discharge, then rinse with fresh water before a grain cargo.
Cleaning after discharge
After sweeping and a sea-water wash, an alkaline hold cleaner removes oily and greasy residues; a foaming cleaner stays longer on vertical walls. Rust staining is removed with a mild acidic cleaner, followed by a full fresh-water rinse. Always check the coating maker’s limits and the charterer’s hold standard (grain clean, normal clean) before choosing a product.
See our ship hold cleaners.
Need a recommendation? Send us the vessel type, the last cargo and the next cargo. We reply with the right product, dilution and MSDS. Contact Hold Chemicals or browse all products.
Comments
emma
Aenean eu leo quam. Pellentesque ornare sem lacinia quam venenatis vestibulum. Duis mollis, est non commodo luctus, nisi erat porttitor ligula, eget lacinia odio sem nec elit. Sed posuere consectetur est at lobortis integer posuere erat ante.
ryan
Cras mattis consectetur purus sit amet fermentum. Integer posuere erat a ante venenatis dapibus posuere velit aliquet. Etiam porta sem malesuada magna mollis.
admin
Nullam id dolor id nibh ultricies vehicula ut id. Cras mattis consectetur purus sit amet fermentum. Aenean eu leo quam. Pellentesque ornare sem lacinia aenean bibendum nulla consectetur.